Salter SAL0020 29.6 V Cordless Max Instruction Manual
![Salter SAL0020 29.6 V Cordless Max manual cover](/images/1e26a2bac710b834e16b8678/thumbs/thumb175x175.webp)
To charge the Salter SAL0020, connect the charging adapter to the vacuum's charging port and plug the adapter into a power outlet. The charging indicator light will turn on, showing that the vacuum is charging.
If the vacuum doesn't start, ensure it is fully charged. Check if the power switch is in the 'On' position and inspect the brush roll for any obstructions that may prevent the vacuum from operating.
To clean the filter, remove it from the vacuum and rinse it under warm water. Allow it to air dry completely before reinserting it into the vacuum to ensure optimal performance.
Loss of suction power can be due to a clogged filter or full dust container. Check and clean the filter, and empty the dust container to restore suction efficiency.
Regular maintenance includes cleaning the filter, emptying the dust container, checking and cleaning the brush roll, and ensuring the battery is charged. Regularly inspect for any blockages in the suction path.
No, the Salter SAL0020 is designed for dry debris only. Using it on wet surfaces can damage the vacuum and void the warranty.
It typically takes about 4 to 5 hours to fully charge the Salter SAL0020 vacuum from a depleted battery.
If the brush roll is not spinning, check for any hair or debris tangled around it. Remove the obstructions and try again. Also, ensure the vacuum is turned on and in the correct mode for brush roll operation.
Store the vacuum in a cool, dry place. Ensure the battery is charged to about 50% if storing for an extended period to maintain battery health.
To extend battery life, avoid letting the battery completely discharge. Charge it after each use and store it in a moderate temperature environment away from direct sunlight.