Salter EK4076 Marblestone Instruction Manual
![Salter EK4076 Marblestone manual cover](/images/6f71dcf4bc4eca16e403db44/thumbs/thumb175x175.webp)
To clean the grill plate, first unplug the appliance and allow it to cool completely. Remove the grill plate and wash it with warm soapy water. Use a non-abrasive sponge to avoid damaging the non-stick surface. Rinse thoroughly and dry before reassembling.
Check if the appliance is properly plugged into a functioning power outlet. Ensure that the temperature control is set correctly. If the issue persists, consult the user manual for troubleshooting tips or contact customer support.
It is recommended to use wooden or silicone utensils to prevent scratching the non-stick coating on the grill plate. Avoid using metal utensils to extend the lifespan of the appliance.
To prevent food from sticking, preheat the grill before adding food. Lightly coat the grill plate with cooking oil or spray. Ensure that the non-stick surface is clean and free from residue.
Yes, the Salter EK4076 Marblestone grill is designed for indoor use only. Using it outdoors may expose it to elements that could damage the appliance.
Ensure the grill is completely cool and clean before storing. Wrap the cord around the designated area and place the appliance in a dry, cool place. Avoid stacking heavy items on top to prevent damage.
Allow the appliance to cool before attempting to remove the drip tray. Carefully slide out the tray, dispose of the fat, and clean the tray with warm soapy water. Rinse and dry thoroughly before reinserting.
If the non-stick coating is peeling, discontinue use and contact customer support for guidance. Avoid using abrasive cleaners or metal utensils to prevent further damage.
Preheat the grill for approximately 5 minutes or until it reaches the desired cooking temperature. The indicator light will typically signal when the appliance is ready to use.
Smoke can occur if there is excess fat or food residue on the grill. Ensure the grill is clean before use, and avoid using excessive oil. If smoke persists, check for any stuck-on debris or consult the manual for further instructions.