Salter EK2408 Coffee Maker to Go Instruction Manual
![Salter EK2408 Coffee Maker to Go manual cover](/images/7513d95949a72e358266f0aa/thumbs/thumb175x175.webp)
To set up the Salter EK2408 Coffee Maker to Go, start by washing all removable parts with warm soapy water. Rinse and dry thoroughly. Place the machine on a flat, stable surface and ensure the power switch is in the 'off' position before plugging it in.
You can use ground coffee suitable for filter machines. Adjust the grind size to medium for optimal brewing results. Avoid using finely ground coffee as it may cause clogging.
Ensure the coffee maker is plugged in and the power switch is turned on. Check if the water reservoir has enough water and the lid is securely closed. If the problem persists, inspect the power outlet and try a different one.
If the coffee tastes weak, try using more coffee grounds or a finer grind. Ensure the water reservoir is filled to the appropriate level and check that the coffee filter is correctly placed.
Clean the coffee maker by running a cycle with equal parts water and white vinegar. After the cycle completes, run two cycles with clean water to remove any vinegar residue. Wash the removable parts with warm soapy water.
If the coffee maker is leaking, check if the water reservoir is overfilled or if there are any cracks. Ensure all parts are assembled correctly and that the filter basket is not clogged.
Yes, you can use the coffee maker to brew tea by placing tea bags or loose tea in the filter basket. Adjust the quantity according to your taste preferences.
To descale the coffee maker, fill the water reservoir with a descaling solution or a mixture of water and vinegar. Run a brewing cycle and then rinse by running two cycles with clean water.
Regularly clean the coffee maker, descale it every 1-2 months depending on usage, and inspect for any worn-out parts. Ensure the filter basket and carafe are cleaned after each use.
Unusual noises may occur if the coffee maker is placed on an uneven surface or if there is debris in the machine. Ensure it is on a stable surface and check for any blockages in the water line or filter basket.