Salter BW06259 DUOsteam Instruction Manual
![Salter BW06259 DUOsteam manual cover](/images/0547f65d8faba8a872417624/thumbs/thumb175x175.webp)
To descale the Salter BW06259 DUOsteam, fill the water tank with a mixture of 50% water and 50% white vinegar. Run the steamer for a few minutes, then rinse thoroughly with clean water to remove any vinegar residue.
Ensure that the water tank is filled and properly seated. Check the steam nozzle for clogs and clean if necessary. Additionally, verify that the device is plugged in and switched on.
Yes, the DUOsteam is safe for delicate fabrics. Use the low steam setting for best results and hold the steamer a few inches away from the fabric.
To clean the exterior, unplug the unit and let it cool down. Wipe the surface with a damp cloth. Avoid using abrasive cleaners or submerging the unit in water.
It is recommended to descale your DUOsteam every 3 to 6 months, depending on the hardness of your water and frequency of use.
Water spots may occur if the steam head is too close to the fabric or if the water isn't pure. Try using distilled water and maintaining a proper distance from the fabric.
Ensure the DUOsteam is cooled down and emptied of water. Store it in a dry, cool place, and keep the cord wrapped loosely around the base.
It is not recommended to use scented water or any additives in the DUOsteam as they can clog the system and void the warranty.
If the DUOsteam overheats, unplug it immediately and allow it to cool down. Check for blockages in the steam vent, and ensure the water tank is filled correctly.
Ensure the water tank is full and securely attached. Regular descaling can also improve steam output by preventing mineral buildup.