Salter BW04294 Instruction Manual
![Salter BW04294 manual cover](/images/74dd89efbb09f433a2ff55cf/thumbs/thumb175x175.webp)
To calibrate your Salter BW04294 scale, place it on a flat, stable surface. Press the calibration button located at the back of the scale until the display shows "CAL". Step off the scale, and it will automatically calibrate itself.
Ensure that the batteries are installed correctly and have sufficient charge. Replace the batteries with new ones if necessary. Check for any visible damage to the scale that might affect its functionality.
It is not recommended to use the Salter BW04294 scale on carpet as it can affect accuracy. Use the scale on a hard, flat surface for best results.
To change the unit of measurement, locate the unit button on the scale. Press the button to cycle through the available units until your desired unit is displayed.
If an error message appears, reset the scale by removing the batteries for a few seconds and then reinserting them. Ensure the scale is on a stable surface and try again. If the problem persists, consult the user manual.
Battery life depends on usage, but it's advisable to replace the batteries every 6 months or when the low battery indicator appears on the display.
Use a damp cloth to gently wipe the surface of the scale. Do not immerse the scale in water or use abrasive cleaners. Ensure the scale is dry before use.
Yes, you can weigh items directly on the scale surface. For more accurate readings, ensure the item is centered and the scale is on a flat, stable surface.
The "Lo" indicator means the battery level is low. Replace the current batteries with new ones to ensure proper functionality.
Inconsistent readings can be due to an uneven surface or movement during weighing. Ensure the scale is on a flat, stable surface and avoid moving the scale or the person/object being weighed.