Ryobi RM300e Operator's Manual
![Ryobi RM300e Mower manual cover](/images/gHjpIeUgLQAXtZPDIrHaKBhw/thumbs/thumb175x175.webp)
To start the Ryobi RM300e, ensure the battery is fully charged and inserted properly. Press and hold the start button and pull the bail switch towards the handle to engage the motor.
Check if the battery is charged and correctly installed. Ensure the safety key is inserted. If the problem persists, inspect for any tripped circuit breakers or blown fuses.
To adjust the cutting height, locate the height adjustment lever on the side of the mower. Move the lever to the desired position to set the cutting height.
Regularly clean the mower deck, check for debris, inspect the blade for damage, and ensure the battery is stored in a cool, dry place when not in use.
To maximize battery life, avoid completely draining the battery before charging, store it at room temperature, and charge it fully before storing for extended periods.
First, check if the battery is depleted. Ensure the blade is not clogged with grass or debris. If necessary, reset the mower by turning it off and on again.
It is not recommended to use the mower in wet conditions as it can damage the motor and pose a safety hazard. Wait until the grass is dry to ensure optimal performance.
After use, disconnect the battery and use a damp cloth to wipe the exterior. For the underside, use a brush or a hose to remove any grass clippings and debris.
The Ryobi RM300e Mower uses a 16-inch steel blade, which can be purchased from authorized Ryobi dealers or compatible hardware stores.
Clean the mower thoroughly, charge the battery fully, and store it in a dry, cool place. Ensure the mower is stored in an upright position to prevent any damage.