Roberts Stream 63i DAB 2010 User Guide
![Roberts Stream 63i DAB 2010 manual cover](/images/f42d63e2cc77b08e04c9c470/thumbs/thumb175x175.webp)
To connect your Roberts Stream 63i to a Wi-Fi network, navigate to the settings menu, select 'Network', choose 'Wi-Fi', and then select your network from the list. Enter the password if prompted.
Ensure the power cord is securely connected to both the radio and the power outlet. Check if the power outlet is working by testing another device. If the issue persists, try a different power cord or contact support.
To reset the radio, go to the 'System settings' menu, scroll down to 'Factory Reset', and confirm the action. Note that this will erase all stored settings and preferences.
Check if the volume is turned up and not muted. Ensure the speakers are connected properly. If using headphones, make sure they are unplugged. Test with another audio source if possible.
To update the firmware, connect the radio to Wi-Fi, go to 'System settings', select 'Software update', and follow the on-screen instructions to check and install any available updates.
Intermittent Wi-Fi connectivity may be caused by interference from other devices, distance from the router, or network congestion. Try relocating the radio closer to the router or changing the Wi-Fi channel.
To improve DAB signal reception, extend the telescopic antenna fully and adjust its position. Ensure the radio is placed near a window or in an elevated location for better signal strength.
Yes, you can play music from a USB stick. Insert the USB stick into the port, select 'USB' mode from the source menu, and use the controls to navigate and play your music files.
To set an alarm, go to the 'Alarm' menu, select 'Set alarm', and configure the time, sound source, and volume. Save the settings to activate the alarm.
To clean the radio, use a soft, dry cloth to wipe the exterior. Avoid using water or chemical cleaners. Regularly check and clean the antenna and ensure all connections are secure.