Roberts Stream 107 Internet 2014 User Guide

To connect the Roberts Stream 107 to a Wi-Fi network, navigate to the 'Settings' menu on the device, select 'Network', and then choose 'Wi-Fi Setup'. Follow the on-screen instructions to select your network and enter the password.
Ensure that your device is properly connected to the internet. Check your Wi-Fi settings and signal strength. If issues persist, restart both the router and the radio.
To perform a factory reset, go to 'Settings', select 'System Settings', and choose 'Factory Reset'. Confirm the reset when prompted. This will erase all settings and stored stations.
No, the Roberts Stream 107 does not support Bluetooth connectivity. It connects to the internet via Wi-Fi for streaming.
To update the firmware, go to 'Settings', select 'System Settings', and choose 'Software Update'. Follow the instructions to check for and install any available updates.
The Roberts Stream 107 supports several audio formats, including MP3, WMA, AAC, and FLAC.
No, the Roberts Stream 107 is designed to connect to the internet only via Wi-Fi and does not have an Ethernet port for wired connections.
Check that the volume is turned up and not muted. Also, ensure that the device is not set to an external audio output mode and that the correct source is selected.
To set up presets, tune to the desired station, press and hold one of the preset buttons until you see a confirmation message on the display.
First, try restarting the device. If the display still does not work, check the power supply and connections. If the problem persists, contact customer support for further assistance.