Roberts Stream 104 Internet 2015 User Guide
![Roberts Stream 104 Internet 2015 manual cover](/images/fa285725d335ce692371e01c/thumbs/thumb175x175.webp)
To connect your Roberts Stream 104 to a Wi-Fi network, turn on the radio and navigate to the 'Settings' menu. Select 'Network' and then 'Wireless Setup'. Choose your Wi-Fi network from the list and enter the password when prompted.
If your radio isn't connecting to the internet, try restarting the device and your router. Ensure the Wi-Fi network name and password are correct. You can also attempt a factory reset from the 'Settings' menu under 'System Reset'.
To perform a factory reset, go to the 'Settings' menu, select 'System Reset', and choose 'Factory Reset'. Confirm your selection, and the radio will revert to its original settings.
Yes, you can stream music from your smartphone to the Roberts Stream 104 using Bluetooth. Enable Bluetooth on both devices and pair them through the 'Bluetooth' option in the radio's menu.
To update the firmware, ensure your radio is connected to the internet. Navigate to 'Settings', then 'System Settings', and select 'Software Update'. Follow the on-screen instructions to complete the update.
If you experience poor sound quality, check the speaker settings and ensure they are not muted or set to a low volume. Also, verify that the internet connection is stable if streaming online content.
To set a preset station, tune to the desired station. Press and hold one of the preset buttons until you see a confirmation message on the display. This will assign the station to that preset button.
Yes, you can use the Roberts Stream 104 as an alarm clock. Go to the 'Alarm' menu, set the desired time, and choose the sound source for the alarm. Ensure the alarm is enabled before exiting the menu.
To save your favorite internet radio stations, listen to the station you want to save, then press and hold a preset button until the display confirms the station has been saved to that preset.
If the display is not working, try restarting the radio. Check the power connection and ensure the device is receiving power. If the issue persists, contact Roberts customer support for further assistance.