Roberts SolarDAB 2 DAB 2016 User Guide

To perform a factory reset, press and hold the 'Menu' button until 'System' is displayed. Use the tuning control to select 'Factory Reset' and confirm by pressing the 'Select' button.
Ensure that the device is charged using a compatible power source. If it still doesn't turn on, try replacing the rechargeable battery, as it may be depleted or faulty.
Extend the antenna fully and position the radio near a window or outdoors for better reception. Avoid placing the radio near electronic devices that may cause interference.
Yes, the battery can be replaced. Turn off the radio, remove the battery compartment cover, and replace the old battery with a new rechargeable AA battery of the same type.
Check the antenna's position and extend it fully. Try relocating the radio to a higher place or near a window. Perform an auto-tune to search for available stations.
Tune to the desired station, press and hold the 'Preset' button until the display shows 'Preset Store'. Use the tuning control to select a preset number, and press 'Select' to save.
Use a soft, dry cloth to clean the exterior. Avoid using water or cleaning agents as they may damage the radio. Store the radio in a cool, dry place when not in use.
The solar panel charges automatically when exposed to sunlight. Ensure the panel is clean and exposed to direct sunlight for optimal charging.
Check if the volume is set too high, causing distortion. Ensure the radio is not near any electronic devices that may cause interference, and verify that the speaker is not blocked.
Perform a soft reset by turning off the radio and removing the battery for a few minutes. Reinsert the battery and turn the radio back on. If the issue persists, a factory reset may be necessary.