Roberts Revival Mini DAB 2016 User Guide

To set up your Roberts Revival Mini DAB 2016, plug it into a power source, extend the antenna, and press the power button. The radio will automatically scan for available DAB stations. Use the tuning knob to browse and select your preferred station.
Ensure the radio is properly plugged into a power source and that the power socket is functional. Check if the power button is being pressed correctly. If the problem persists, try a different power outlet or contact customer support.
To improve reception, fully extend the antenna and position the radio near a window or away from electronic devices that may cause interference. You can also try repositioning the radio for better signal quality.
To reset the radio, press the Menu button, navigate to the 'System' option using the tuning knob, and select 'Factory Reset'. Confirm the reset when prompted. This will erase all presets and settings.
Tune to your desired station, then press and hold one of the preset buttons until the display shows a confirmation message. Repeat for additional presets using other preset buttons.
'No Signal' may indicate poor reception. Ensure the antenna is fully extended and try repositioning the radio. Check if the radio is in a location with good DAB coverage.
Yes, the radio can be powered by 4 x AA batteries for portable use. Simply insert the batteries into the compartment at the bottom of the radio, ensuring correct polarity.
Regularly clean the exterior with a soft, dry cloth. Avoid using solvents or abrasive cleaners. Check the antenna for dust and ensure it is extended fully when in use.
Press the Mode button on the radio to toggle between DAB and FM modes. The display will indicate the active mode.
Check the volume level and ensure it is not set too high. Adjust the position of the radio and antenna to enhance signal strength. If using batteries, ensure they are not depleted.