Roberts R9993 Classic 993 Analogue 2016 User Guide
![Roberts R9993 Classic 993 Analogue 2016 manual cover](/images/10ae966e523bfc2810f0cdac/thumbs/thumb175x175.webp)
To set the time, use the tuning knob to select the time setting mode, then adjust the hours and minutes using the tuning dial until the correct time is displayed.
First, check if the batteries are correctly inserted and have charge. If using an AC adapter, ensure it is properly connected to the power source and the radio.
Extend the telescopic antenna fully and adjust its position. You may also try repositioning the radio near a window or higher location to enhance reception.
Yes, you can use rechargeable batteries. Ensure they are fully charged and inserted correctly. Alkaline batteries are recommended for optimal performance.
Use a soft, dry cloth to gently wipe the exterior of the radio. Avoid using any chemicals or water, as they can damage the electronics.
Static noise can be caused by electrical interference. Try moving the radio away from other electronic devices or appliances to reduce interference.
To reset, remove the batteries and disconnect any power source for a few minutes. Reinsert the batteries or reconnect the power to reset the device.
Yes, the Roberts R9993 has a headphone jack. Simply plug in your headphones to enjoy private listening.
Store the radio in a cool, dry place away from direct sunlight. Remove the batteries if the radio will not be used for an extended period to prevent corrosion.
Use the waveband selector switch to choose between AM and FM bands. Ensure the antenna is properly adjusted for the selected band.