Roberts Play BT Bluetooth 2015 User Guide
![Roberts Play BT Bluetooth 2015 manual cover](/images/5a349a77cdbdaee6289e54c2/thumbs/thumb175x175.webp)
To pair your Roberts Play BT with a smartphone, turn on the device and enable Bluetooth. On your smartphone, go to the Bluetooth settings and search for available devices. Select "Roberts Play BT" from the list, and the devices should pair.
If your device won't turn on, ensure it is charged by connecting it to a power source using the appropriate charging cable. If it still doesn't turn on, try resetting the device by holding down the power button for 10 seconds.
To reset your device to factory settings, locate the reset button (often a small pinhole) and press it using a paperclip or similar tool for about 5 seconds. The device will restart and return to factory settings.
Distorted sound may be due to low battery or being out of Bluetooth range. Ensure the device is fully charged and that you are within range. Also, check for interference from other electronic devices.
To update the firmware, visit the Roberts Radio website and download the latest firmware for your model. Follow the instructions provided to install the update via a USB connection.
The Roberts Play BT typically offers up to 10 hours of playback time. To extend battery life, reduce volume levels, turn off the device when not in use, and avoid exposure to extreme temperatures.
Yes, the Roberts Play BT can be used as a speakerphone. When a call comes in, the music will pause, allowing you to answer the call directly through the speaker.
Ensure that Bluetooth is enabled on both the Roberts Play BT and the device you are trying to connect. Try turning Bluetooth off and on again, and check if the device is within range. If the issue persists, restart both devices.
To clean your device, use a soft, dry cloth to wipe the exterior. Avoid using water or cleaning solutions. Store the device in a cool, dry place to prevent damage. Regularly check for firmware updates to ensure optimal performance.
The Roberts Play BT can remember multiple paired devices, but it can only connect to one device at a time. To switch between devices, disconnect from the current device and connect to another one from the list of paired devices.