Roberts Mini Revival 2017 User Guide
![Roberts Mini Revival 2017 manual cover](/images/ab9dee010b19f389c3701528/thumbs/thumb175x175.webp)
To set up the Roberts Mini Revival 2017, plug in the device using the provided power adapter, extend the aerial for better signal reception, and turn it on by pressing the power button. Use the mode button to select DAB, FM, or Bluetooth.
Ensure that the aerial is fully extended and positioned vertically. Avoid placing the radio near other electronic devices that might cause interference. Try relocating the radio to a different spot with better signal reception.
Check if the radio is properly plugged in and turned on. If the issue persists, try performing a factory reset by pressing and holding the menu button and selecting 'Reset' from the options.
Switch the radio to Bluetooth mode by pressing the mode button. On your smartphone, enable Bluetooth and search for devices. Select 'Roberts Mini Revival 2017' from the list to pair and connect.
Regularly dust the radio with a soft, dry cloth. Avoid using water or cleaning agents. Inspect the aerial and connections periodically to ensure they are secure and in good condition.
To perform a factory reset, press and hold the menu button until the menu appears. Use the tuning knob to navigate to 'System Settings', select 'Factory Reset', and confirm your selection.
Ensure that the power adapter is securely connected and that there is power at the outlet. Check the fuse in the plug if applicable. If using batteries, replace them with fresh ones.
Press the menu button and navigate to 'Alarms'. Use the tuning knob to set the alarm time, sound source, and volume. Confirm your settings to activate the alarm.
Ensure that the radio is in Bluetooth mode and not already connected to another device. Check that your device's Bluetooth is enabled and within range. Try restarting both the radio and your device.
To save a station, tune to the desired frequency, then press and hold one of the preset buttons until you hear a confirmation beep. The station is now saved to that preset number.