Roberts Gemini RD4 DAB 0 User Guide
![Roberts Gemini RD4 DAB 0 manual cover](/images/2cf81921c85d0ef15d6b6af3/thumbs/thumb175x175.webp)
To set up your Roberts Gemini RD4 DAB radio, plug it into a power source, extend the antenna fully, and press the power button. The radio will automatically start a DAB station scan. Once completed, you can navigate through the available stations using the tuning controls.
If your Gemini RD4 does not turn on, first check that it is plugged into a functioning power outlet. Ensure the power cord is securely connected. If the issue persists, try using a different power outlet or check for any blown fuses in the plug.
To improve DAB signal reception, fully extend the radio's antenna and adjust its position for better signal strength. Placing the radio near a window or away from electronic devices can also help reduce interference.
To perform a factory reset on your Gemini RD4, press and hold the 'Menu' button until the settings menu appears. Navigate to 'System Settings' using the tuning controls, select 'Factory Reset', and confirm your choice.
If your radio displays "No Signal", ensure the antenna is fully extended and positioned correctly. Try moving the radio to a different location with better signal reception. If the problem continues, perform a full station scan to update the available DAB stations.
Yes, the Roberts Gemini RD4 supports both DAB and FM radio. Use the 'Mode' button to switch between DAB and FM modes, then use the tuning controls to find and select your desired FM station.
To set an alarm on your Gemini RD4, press the 'Menu' button and navigate to 'Alarm Settings'. Use the tuning controls to set the desired time and select your preferred wake-up sound, either a buzzer or a radio station.
If the sound is distorted, check the volume level and reduce it if necessary. Ensure the radio is not placed near devices that could cause interference. Additionally, inspect the antenna to make sure it is fully extended and properly positioned.
To save your favorite stations, tune to the desired station and press and hold one of the preset buttons until you hear a confirmation beep. This will store the station to that preset button for easy access in the future.
Yes, the Roberts Gemini RD4 has a headphone jack. Simply plug your headphones into the headphone socket to listen privately without disturbing others.