Roberts Elise DAB 2009 User Guide
![Roberts Elise DAB 2009 manual cover](/images/b6105ccd082b6abaa8194510/thumbs/thumb175x175.webp)
To perform a factory reset, press and hold the Menu button until 'Factory Reset' appears on the display. Use the tuning control to select 'Yes' and confirm by pressing the Select button. This will reset all settings to their defaults.
Ensure that the radio is plugged into a functioning power outlet. Check the power cable for any signs of damage. If using batteries, replace them with new ones and ensure they are inserted correctly.
Extend the antenna fully and adjust its position for optimal reception. Try repositioning the radio closer to a window. Avoid placing the radio near electronic devices that may cause interference.
Press the Alarm button to enter alarm settings. Use the tuning control to set the alarm time and mode (DAB/FM/Buzzer). Confirm your selections with the Select button.
'No Signal' indicates poor reception. Try repositioning the antenna or moving the radio to a different location. Perform a full scan to update available stations.
Yes, you can connect headphones using the headphone jack located on the side of the radio. Ensure the headphone plug is fully inserted for optimal audio quality.
Tune to the desired station. Press and hold one of the preset buttons (1-5) until you hear a beep or see confirmation on the display. The station is now saved as a preset.
Check if the radio is powered on and connected to a power source. If the display is still blank, perform a factory reset. If the issue persists, contact Roberts customer support.
Press the Mode button to toggle between DAB and FM modes. The current mode will be displayed on the screen.
Use a soft, dry cloth to wipe the exterior of the radio. Avoid using water or cleaning solvents, as they may damage the surface or internal components.