Ricoh WG-30 Operating Manual

To transfer photos, connect the Ricoh WG-30 to your computer using a USB cable. The camera should be recognized as a removable drive. Open the drive, navigate to the DCIM folder, and copy your photos to your desired location on the computer.
If the Ricoh WG-30 doesn't turn on, first ensure the battery is charged. If the battery is charged and the camera still won't power on, try removing and reinserting the battery. If the issue persists, the camera may need servicing.
To reset the Ricoh WG-30 to factory settings, navigate to the Setup menu, select 'Reset', and confirm the action. This will restore the camera to its default settings.
To clean the lens, use a soft, dry microfiber cloth. Gently wipe the lens in a circular motion. Avoid using liquid cleaners or rough materials that could scratch the lens.
Yes, the Ricoh WG-30 is waterproof. Ensure all covers are securely closed before submersion. Rinse the camera with fresh water after use in saltwater and ensure it's completely dry before opening any covers.
To set the date and time, go to the Setup menu, select 'Date Adjustment', and set the current date and time using the camera's navigation buttons.
If images are blurry, check the focus settings and ensure the lens is clean. Use a tripod or stabilize the camera for low-light conditions and make sure the subject is within the camera's focus range.
To extend battery life, turn off the camera when not in use, reduce the LCD screen brightness, and avoid using the flash unless necessary. Consider carrying a spare battery for longer shoots.
The Ricoh WG-30 is compatible with SD, SDHC, and SDXC memory cards. Ensure the card is properly inserted and formatted in the camera before use.
Use a protective case when not in use, and attach a wrist strap to prevent accidental drops. Keep the camera away from extreme temperatures and avoid exposing it to dust and sand.