Pyle PWPBT250 Instruction Manual

To pair your Pyle PWPBT250 speaker with a Bluetooth device, turn on the speaker and activate the Bluetooth mode by pressing the Bluetooth button. On your Bluetooth device, search for available devices and select "PWPBT250" from the list. Once connected, you will hear a confirmation tone.
If your Pyle PWPBT250 speaker won't turn on, ensure that the battery is charged by connecting it to a power source using the provided charging cable. If the speaker still does not turn on, try resetting the device by pressing and holding the power button for 10 seconds.
To reset the Pyle PWPBT250 speaker to factory settings, turn off the speaker and press and hold the power button along with the volume up button for about 10 seconds until you hear a beep. This will reset the speaker to its default settings.
To clean your Pyle PWPBT250 speaker, use a soft, dry cloth to wipe the exterior. Avoid using any liquid or harsh chemicals. Ensure the speaker is turned off and unplugged before cleaning. Regularly check for dust in the speaker grills and use a soft brush to remove it.
To improve the battery life of your Pyle PWPBT250 speaker, avoid overcharging and allow the battery to discharge completely before recharging. Use the speaker at moderate volume levels and turn it off when not in use.
Poor or distorted sound quality on your Pyle PWPBT250 speaker could be due to interference from other electronic devices, low battery, or being too far from the paired device. Try moving the speaker closer to the Bluetooth source, charging the battery, or reducing interference from other devices.
Yes, you can use your Pyle PWPBT250 speaker while it is charging. Simply connect the speaker to a power source using the charging cable and continue using it as normal.
To connect your Pyle PWPBT250 speaker to a non-Bluetooth device, use an auxiliary cable. Plug one end into the AUX input on the speaker and the other end into the headphone jack of your device. Ensure the speaker is set to AUX mode.
If your Pyle PWPBT250 speaker is not charging, check the charging cable and adapter for any damage. Try using a different compatible charger. If the problem persists, inspect the charging port for debris or damage and consider contacting Pyle customer support for further assistance.
Currently, the Pyle PWPBT250 speaker does not support firmware updates. Ensure you are using the speaker according to the manufacturer's instructions to maintain optimal performance.