Pyle PWMA335BT User Manual
![Pyle PWMA335BT Speaker System manual cover](/images/RDhAODHxJergLHroQBsUvByr/thumbs/thumb175x175.webp)
To pair your speaker with a Bluetooth device, turn on the speaker, switch it to Bluetooth mode, and search for "Pyle Audio" on your device's Bluetooth settings. Select it to pair.
Ensure the volume is not muted, the correct input source is selected, and all cables are connected properly. Check if the Bluetooth device is connected correctly if using wireless.
To reset the speaker, turn it off, then hold down the reset button (if available) or consult the user manual for specific reset instructions.
Yes, the speaker is portable and can be used outdoors, but ensure it is protected from direct moisture and extreme temperatures to prevent damage.
Connect the speaker to a power outlet using the provided AC adapter. Charging time can vary, but it typically takes a few hours for a full charge.
Ensure the speaker is in Bluetooth mode and within range. Restart the Bluetooth device and the speaker, and attempt to pair again.
To extend battery life, reduce the volume, switch off the speaker when not in use, and avoid overcharging by disconnecting it once fully charged.
The Bluetooth range is typically up to 30 feet (10 meters) without obstacles. Walls and other obstructions can reduce this range.
The speaker can only connect to one Bluetooth device at a time. Disconnect the current device to pair with another.
Keep the speaker clean and dust-free, store it in a cool, dry place, and ensure that the battery is charged periodically if not used for extended periods.