Pyle PLCM12 User Manual

Pages 4

Year 0

Language(s)

of 4

Pyle PLCM12 Camera Specification

The Pyle PLCM12 Camera is a compact and versatile rearview camera designed to enhance vehicle safety with its robust technical features. It is primarily engineered for easy installation on a wide range of vehicles, providing drivers with a reliable means to observe the area behind them. The camera captures high-resolution images with its 1/4-inch color CMOS sensor, ensuring clear and detailed video output. It supports a video output system compatible with both NTSC and PAL, offering flexibility for various vehicle multimedia setups.

The camera's lens boasts a wide 170-degree viewing angle, significantly reducing blind spots and enhancing the driver's field of view. Its low-light performance is notable, with a minimum illumination requirement of 0.2 Lux, which ensures functionality in various lighting conditions. The device is constructed to withstand challenging environments, featuring a waterproof and weather-resistant housing with an IP67 rating. This makes it suitable for operation in diverse weather conditions, ensuring longevity and reliability.

The Pyle PLCM12 operates within a voltage range of 12V DC, making it compatible with most vehicle electrical systems. Its compact dimensions facilitate seamless integration into the vehicle's design without obstructing aesthetics or existing components. Installation is straightforward, typically involving mounting the camera on the license plate or bumper area, and connecting it to a compatible monitor or display unit within the vehicle. Overall, the Pyle PLCM12 Camera provides a practical and efficient solution for drivers seeking to enhance their vehicle's safety features with a dependable rearview camera system.

Pyle PLCM12 Camera F.A.Q.

How do I install the Pyle PLCM12 camera in my vehicle?

To install the Pyle PLCM12 camera, first mount the camera on the rear license plate area using the provided hardware. Connect the camera’s power cable to your vehicle's reverse light circuit. Finally, run the video cable to the display unit at the front of the vehicle.

What should I do if the camera display is fuzzy or unclear?

If the display is unclear, check the camera lens for dirt or debris and clean it with a soft cloth. Ensure all cable connections are secure and inspect the video cable for any damage.

Can the Pyle PLCM12 camera be used at night?

Yes, the Pyle PLCM12 camera is designed with low-light capability, allowing it to function effectively at night. However, ensure the camera lens is clean for the best performance.

How do I troubleshoot if the camera is not turning on?

If the camera does not turn on, check the power connection to the reverse light circuit. Verify that the vehicle's reverse light is functioning, as this powers the camera. Inspect the fuse and replace it if necessary.

What maintenance is required for the Pyle PLCM12 camera?

Regularly clean the camera lens with a soft, damp cloth to remove dirt and debris. Periodically check the cable connections for any signs of wear or damage. Ensure the camera mount is secure.

Is the Pyle PLCM12 camera waterproof?

Yes, the Pyle PLCM12 camera is designed to be weather-resistant and can withstand rain and car washes, but avoid direct high-pressure streams aimed at the camera.

How do I adjust the camera angle on the Pyle PLCM12?

Loosen the screws on the camera mount, adjust the camera to the desired angle, and then tighten the screws to secure it in place. Ensure the view is clear of obstructions.

What should I do if there is no video signal on the monitor?

Check the video cable connection between the camera and the monitor. Ensure the monitor is set to the correct input source. Inspect the cable for any signs of damage.

Can I use the Pyle PLCM12 camera with any monitor?

The Pyle PLCM12 camera is compatible with most monitors that have a composite video input. Ensure the monitor supports the camera's video signal format.

What is the best way to test if the Pyle PLCM12 camera is working before installation?

To test the camera, connect it to a power source and a monitor with the video cable before installation. Ensure the monitor displays the camera feed correctly.