Pyle PBKSP30DB User Guide
![Pyle PBKSP30DB Speaker manual cover](/images/coYDnIsgVjOuUfPQpbFKeOFh/thumbs/thumb175x175.webp)
To pair your Pyle PBKSP30DB speaker with a Bluetooth device, turn on the speaker and enable Bluetooth pairing mode by pressing the Bluetooth button. On your device, search for available Bluetooth connections and select 'PBKSP30DB' to connect.
First, ensure the speaker is charged by connecting it to a power source. If it still does not turn on, press and hold the power button for at least 5 seconds. If the issue persists, consult the user manual or contact customer support.
To reset the speaker to factory settings, hold the reset button (located near the charging port) for approximately 10 seconds until the speaker powers off and on again.
Use a soft, dry cloth to gently wipe the exterior of the speaker. Avoid using any liquids or harsh chemicals. For the speaker grille, a light vacuum can help remove dust.
You can connect a non-Bluetooth device using the auxiliary (AUX) input. Use a 3.5mm audio cable to connect the device’s headphone jack to the speaker’s AUX input.
Ensure the charging cable and adapter are functioning properly. Try using a different compatible charger. If the issue continues, inspect the charging port for debris, and clean it if necessary.
To extend battery life, avoid exposing the speaker to extreme temperatures. Fully charge the battery before first use and try to keep the battery charge between 20% and 80% whenever possible.
Yes, the Pyle PBKSP30DB speaker can be used while it is charging. However, for optimal battery health, it is recommended to use it unplugged once it reaches a full charge.
Currently, there are no user-accessible firmware updates for the Pyle PBKSP30DB speaker. Keep an eye on the manufacturer's website for any potential updates in the future.
Store the speaker in a cool, dry place, ideally in its original packaging. Ensure the battery is partially charged (around 50%) before storing it to maintain battery health.