Pyle PMP78RBIN User Guide

To turn on the Pyle PMP78RBIN Megaphone, insert the required batteries into the compartment, then flip the power switch located near the handle to the 'ON' position.
The Pyle PMP78RBIN Megaphone requires 8 C-type batteries for operation.
To activate the siren function, press the 'SIREN' button located on the megaphone’s control panel. Press it again to deactivate the siren.
Ensure the batteries are correctly inserted and have sufficient charge. Check the volume control to make sure it is not set to the minimum. Also, verify that the power switch is in the 'ON' position.
To clean the megaphone, use a soft, dry cloth to wipe the exterior. Avoid using harsh chemicals. Regularly check the battery compartment for leakage and clean contacts with a dry cloth if necessary.
Yes, the volume can be adjusted using the volume control knob located on the megaphone’s handle. Turn it clockwise to increase the volume and counterclockwise to decrease it.
Yes, rechargeable C-type batteries can be used, but ensure they are fully charged for optimal performance.
If the sound output is weak or the megaphone fails to turn on, it may be time to replace the batteries. A decrease in volume or intermittent operation can also indicate low battery power.
The Pyle PMP78RBIN Megaphone has a range of up to 800 yards depending on environmental conditions and battery power.
To use the recording function, press the 'REC' button to start recording your message. Once recorded, press the 'PLAY' button to play back the message through the megaphone.