Pyle PBKSP22 User Manual
![Pyle PBKSP22 Speaker manual cover](/images/fjEDDwpDUjOzbgdxAExWxEvN/thumbs/thumb175x175.webp)
To connect your Pyle PBKSP22 Speaker to a Bluetooth device, turn on the speaker and activate Bluetooth pairing mode. On your Bluetooth device, search for available devices and select "Pyle PBKSP22" from the list. Once connected, you will hear a confirmation tone.
If your speaker is not turning on, first ensure that it is fully charged. Connect it to a power source using the provided charger. If it still does not turn on, try resetting the device by holding down the power button for 10 seconds.
To reset the Pyle PBKSP22 Speaker to factory settings, press and hold the reset button (usually located near the charging port) for about 5 seconds until the LED indicator flashes. This will restore the speaker to its original settings.
To maintain battery life, avoid fully draining the battery before recharging. It's best to charge the speaker when the battery level is low. Also, keep the speaker in a cool, dry place when not in use and avoid overcharging by disconnecting it once fully charged.
For optimal sound quality, place the speaker on a stable surface and ensure it is not obstructed by walls or other objects. Adjust the equalizer settings on your audio source to enhance the audio output. Additionally, ensure the speaker is clean and free from dust.
Distorted sound can occur if the volume is set too high. Lower the volume on the speaker and adjust the volume on your audio source. Check for any physical obstructions or damage to the speaker that might affect sound quality.
Yes, you can use the Pyle PBKSP22 Speaker while it is charging. However, for optimal battery health, it is recommended to occasionally disconnect the speaker from the charger and allow it to discharge and recharge fully.
Ensure that the speaker is within range of the Bluetooth device and that there are no obstacles obstructing the signal. Try unpairing and then repairing the devices. If the issue persists, check for any software updates for your Bluetooth device or reset the speaker.
To clean your Pyle PBKSP22 Speaker, use a soft, dry cloth to wipe down the exterior. Avoid using water or cleaning solutions directly on the speaker. For stubborn dirt, lightly dampen the cloth with water and gently clean the affected areas.
The Pyle PBKSP22 Speaker does not support direct pairing for stereo sound. However, you can use a third-party Bluetooth transmitter that supports dual audio output to achieve a similar effect.