Pure Sonus-1XT User Guide
![Pure Sonus-1XT manual cover](/images/cddb89d19baaec753c62db4a/thumbs/thumb175x175.webp)
To connect your Pure Sonus-1XT to a Bluetooth device, turn on the speaker and enable Bluetooth pairing mode by pressing the Bluetooth button. On your device, search for available Bluetooth devices and select "Sonus-1XT" from the list.
If your Sonus-1XT is not turning on, ensure it is charged by connecting it to a power source using the provided charger. If it still does not turn on, try resetting the device by pressing and holding the power button for 10 seconds.
To reset your Pure Sonus-1XT to factory settings, press and hold the power and volume up buttons simultaneously for 10 seconds until you hear a confirmation tone. This will erase all paired devices and settings.
Yes, you can use the Sonus-1XT while it is charging. Connect the charger to a power source and continue to use the device as normal.
To clean your Sonus-1XT, use a soft, dry cloth to gently wipe the exterior surfaces. Avoid using harsh chemicals or abrasive materials that could damage the finish.
To update the firmware, download the latest update from the Pure website, connect your Sonus-1XT to your computer via USB, and follow the instructions provided in the update file.
If there's no sound, check that the volume is turned up and that your device is not muted. Ensure that the Sonus-1XT is properly paired with your device and try restarting both devices.
To improve battery life, avoid using the device at maximum volume for extended periods, and ensure it is turned off when not in use. Keep the firmware updated for optimal performance.
The Sonus-1XT is water-resistant but not fully waterproof. It can withstand light splashes, but it should not be submerged in water.
The Sonus-1XT supports multi-device pairing. To pair with another device, disconnect the current device, put the speaker back into pairing mode, and connect the new device. Repeat the process for each additional device.