Pure Chronos CD User Guide
![Pure Chronos CD manual cover](/images/5ebd7a136ae23c80ea1bde23/thumbs/thumb175x175.webp)
To set the alarm on your Pure Chronos CD, press the 'Alarm' button. Use the 'Select' button to choose 'Alarm 1' or 'Alarm 2', then press 'Select'. Use the arrow buttons to set the time and press 'Select' to confirm.
If your Pure Chronos CD is not turning on, check the power connection and ensure the power adapter is plugged in properly. If the problem persists, try resetting the device by unplugging it and plugging it back in after a few minutes.
To improve FM radio reception, fully extend the aerial wire and adjust its position. Try moving the radio closer to a window or away from other electronic devices that might cause interference.
Yes, the Pure Chronos CD supports MP3 CD playback. Simply insert the MP3 CD into the disc slot, and use the 'Select' and arrow buttons to navigate through the tracks.
To perform a factory reset, press and hold the 'Menu' button until the display shows 'Factory Reset', then press 'Select'. The device will restart and return to its original settings.
The Pure Chronos CD uses a CR2032 lithium coin cell battery for backup. This battery maintains the clock and alarm settings during power outages.
To adjust the display brightness, press the 'Menu' button and navigate to 'Display'. Use the arrow buttons to adjust the brightness level and press 'Select' to save your settings.
If your Pure Chronos CD is not reading discs, ensure the disc is clean and free from scratches. Try another CD to rule out the possibility of a faulty disc. If the problem persists, the CD lens might need cleaning.
You can set the sleep timer by pressing the 'Sleep' button. Use the arrow buttons to select the desired time before the radio turns off automatically, then press 'Select'.
Press the 'Source' button to select 'FM' or 'DAB', then use the arrow buttons to scroll through available stations. Press 'Select' to tune to your chosen station.