Pure PocketDAB 1500 User Guide
![Pure PocketDAB 1500 manual cover](/images/146c7570faeacd0432dec316/thumbs/thumb175x175.webp)
To perform a factory reset, turn on the device, navigate to the settings menu, and select 'Factory Reset'. Confirm your selection and the device will reset to its original settings.
To extend battery life, reduce screen brightness, enable power-saving mode, and turn off the radio when not in use. Ensure that the battery is fully charged before first use.
If the device is not turning on, check if the battery is charged. If the battery is charged and the device still doesn't turn on, try performing a reset by pressing and holding the power button for 10 seconds.
To improve signal reception, extend the telescopic antenna fully and adjust its position. Try moving to an open area or closer to a window where signal strength may be better.
Yes, firmware updates may be available. Check the Pure website for the latest updates and follow the instructions provided to download and install them.
To set a preset, tune to the desired station, then press and hold one of the preset buttons until you hear a confirmation beep. The station is now saved to that preset button.
If the display is not clear, adjust the brightness settings in the menu. If the problem persists, check for any protective film covering the screen and remove it.
Insert the headphone jack into the headphone socket on the device. Ensure it is securely connected for optimal sound quality.
If there is no sound, check that the volume is turned up and the device is not muted. Ensure headphones or speakers are properly connected. If using the internal speaker, check that nothing is blocking the speaker grille.
To clean the device, use a soft, dry cloth to wipe the exterior. Avoid using liquids or abrasive cleaners. Regularly check the antenna and headphone jack for dust and debris.