Pure Evoke C-D4 BT User Guide
![Pure Evoke C-D4 BT manual cover](/images/12aef9d328d512f2b8d4a266/thumbs/thumb175x175.webp)
To set up Bluetooth, turn on the Pure Evoke C-D4 BT, activate Bluetooth on your device, and search for available devices. Select 'Evoke C-D4' from the list to pair.
Ensure the power cable is securely connected to both the unit and a working power outlet. If it still doesn't turn on, try a different outlet or check the fuse in the plug.
Extend the aerial fully and adjust its position for the best reception. Placing the radio near a window can also improve signal strength.
Yes, you can set an alarm by navigating to the alarm settings in the menu. From there, you can set the time, alarm tone, and frequency (daily, weekdays, weekends).
To perform a factory reset, go to the settings menu, select 'Factory Reset', and confirm your choice. This will restore the device to its original settings.
Check if the remote control batteries need replacement. Ensure there are no obstructions between the remote and the device. Finally, verify that the remote sensor on the device is clean.
Check the official Pure website for any available updates. If an update is available, follow the instructions provided to download and install it via USB or over-the-air if supported.
Ensure the disc is clean and free from scratches. Try a different disc to determine if the issue is with the player or disc. If the problem persists, the lens may need cleaning or servicing.
Tune into the desired station, then press and hold one of the preset buttons until you hear a confirmation tone. The station is now saved to that preset.
Yes, you can connect headphones to the 3.5mm audio jack located on the device to listen privately.