Peavey Tracer LT Operating Guide

Pages 11

Year 0

Language(s)

of 11

Peavey Tracer LT Guitar Specification

The Peavey Tracer LT Guitar is an electric guitar model designed to offer a blend of performance, style, and versatility. It features a sleek, contoured body crafted from lightweight basswood, ensuring both comfort and resonance. The neck is constructed from maple, providing a smooth and fast playing experience, with a 22-fret rosewood fingerboard that offers excellent tone and sustain. The Tracer LT is equipped with a versatile pickup configuration, typically featuring a high-output humbucker in the bridge position and a single-coil pickup in the neck position, allowing for a wide range of tonal possibilities from crisp cleans to aggressive overdrive.

The guitar's hardware includes a reliable locking tremolo system, which provides stable tuning even with extensive whammy bar use. Its controls consist of a master volume and tone knob, along with a three-way pickup selector switch, enabling players to easily navigate between different sounds and settings. The Peavey Tracer LT's design also incorporates a bolt-on neck, which facilitates easy maintenance and potential customization. Aesthetically, the Tracer LT stands out with its striking finishes and sharp body contours, appealing to both traditionalists and modernists alike.

This guitar is designed for musicians seeking a versatile instrument that can handle various genres, from rock and metal to blues and jazz. Its combination of quality craftsmanship, innovative features, and affordability makes it an attractive option for both beginner and experienced guitarists looking for reliability and expressive potential in their performance arsenal.

Peavey Tracer LT Guitar F.A.Q.

How do I properly set up the Peavey Tracer LT for optimal sound?

Start by tuning your guitar using an electronic tuner. Adjust the truss rod to ensure the neck is straight. Set the action height and intonation using the bridge saddles. Finally, adjust the pickup height to balance the volume between strings.

What are common troubleshooting steps if my Tracer LT is not producing sound?

Check if the cable is securely plugged into the guitar and the amplifier. Test the cable with another instrument to rule out a faulty cable. Ensure the volume and tone knobs are turned up. Inspect the pickup selector switch for proper operation.

How can I clean and maintain the Peavey Tracer LT's finish?

Use a soft, dry cloth to wipe down the guitar after each use to remove sweat and fingerprints. For deeper cleaning, use a guitar-specific cleaner and polish. Avoid using household cleaners as they can damage the finish.

What steps should be taken to change the strings on a Peavey Tracer LT?

Loosen and remove the old strings one at a time. Clean the fretboard and hardware. Thread the new strings through the bridge and tuning pegs. Tune each string to pitch, stretching them gently to help them settle.

How do I adjust the truss rod on my Tracer LT?

Locate the truss rod adjustment nut at the headstock. To correct a bowed neck, tighten the truss rod by turning the nut clockwise. To correct a back-bowed neck, turn the nut counterclockwise. Adjust in small increments and check the neck relief frequently.

What should I do if the tuning pegs on my Peavey Tracer LT are slipping?

Tighten the screws on the tuning peg buttons. If the gears are worn, consider replacing the tuning pegs. Ensure the strings are wound correctly with enough tension to maintain tuning stability.

How can I eliminate fret buzz on my Peavey Tracer LT?

Check the neck relief and adjust the truss rod if necessary. Raise the action by adjusting the bridge saddles. Ensure the nut slots are not too low and that frets are level and free of wear.

What is the proper way to store my Peavey Tracer LT when not in use?

Store the guitar in a case or on a stand in a room with stable temperature and humidity. Avoid direct sunlight and extreme conditions. Loosen the strings slightly if the guitar will be stored for an extended period.

How do I replace the pickups on my Peavey Tracer LT?

Desolder the existing pickups from the control circuit. Remove the mounting screws and take out the old pickups. Install the new pickups, secure them with screws, and solder the wires according to the wiring diagram.

What can cause the output jack on my Tracer LT to become loose, and how can I fix it?

Over time, the nut securing the output jack may loosen. To fix it, remove the jack plate, tighten the nut with a wrench, and ensure the jack is stable. Be careful not to twist the jack itself while tightening.