Peavey Tracer Deluxe Operating Guide

To set up your Peavey Tracer Deluxe, start by adjusting the truss rod to ensure the neck is straight. Follow this by setting the action height at the bridge according to your preference. Finally, intonate the guitar by adjusting the saddle positions until the notes are in tune across the fretboard.
Check the grounding wire connections and ensure they are secure. Additionally, inspect the pickup height and adjust if necessary. If the issue persists, consider using a noise gate pedal or shielding the guitar's cavity.
Start by loosening and removing the old strings. Clean the fretboard using a suitable cleaner, then thread new strings through the bridge and tuning pegs. Tune the strings gradually and evenly to the desired pitch.
Use a soft, lint-free cloth to wipe down the guitar after each use. For deeper cleaning, apply a guitar-specific polish using a clean cloth, always following the wood grain to avoid scratches.
Fret buzz can usually be resolved by adjusting the truss rod for proper neck relief or raising the action slightly. If the problem persists, consider having the frets levelled by a professional technician.
Tighten the tuning machine screws and nuts to ensure they are secure. If slipping continues, consider replacing the tuning machines with higher-quality alternatives.
To adjust the intonation, compare the pitch of the open string with the pitch at the 12th fret. Use a screwdriver to adjust the saddle position until both pitches match perfectly. Repeat for each string.
Clean the neck with a damp cloth to remove any residue, followed by a dry cloth to ensure no moisture is left. For persistent stickiness, consider using a small amount of fine guitar polish or cleaner.
Store the guitar in a hard case in a stable environment away from extreme temperatures and humidity. Use a guitar humidifier if necessary to maintain optimal conditions, especially in dry climates.
Regularly clean the guitar's body and neck, check and adjust the truss rod, action, and intonation as needed, and ensure all hardware is tightened and functioning properly.