Peavey Predator Plus Operating Guide
![Peavey Predator Plus Guitar manual cover](/images/NKXaIxfIyMALmJazfiAPcFcm/thumbs/thumb175x175.webp)
To set up your Peavey Predator Plus for optimal playability, start by adjusting the truss rod to achieve the desired neck relief. Next, set the action by adjusting the bridge saddles, ensuring the strings are not too high or too low. Finally, check the intonation using a tuner and adjust the saddle positions if necessary to ensure each note is in tune along the fretboard.
If you experience buzzing on certain frets, check the neck relief and adjust the truss rod if necessary. Ensure the action is set correctly by adjusting the bridge saddles. If the problem persists, inspect for uneven frets and consider having a professional perform a fret leveling.
To clean and maintain the finish, use a soft, lint-free cloth to wipe down the body after each use. For deeper cleaning, use a guitar-specific polish and a clean cloth. Avoid using household cleaners as they may damage the finish. Store the guitar in a case or on a stand to protect it from dust and physical damage.
The type of strings recommended depends on your playing style, but generally, light to medium gauge strings work well with the Peavey Predator Plus. It's advisable to change strings every 1-3 months, or more frequently if you play often or notice a loss of tone and intonation.
First, check the cable and amplifier connections. Ensure the volume and tone knobs are not turned down. Inspect the output jack for loose connections. If the problem persists, open the electronics cavity and check for loose wires or poor solder joints. If you're not comfortable doing this, consult a professional technician.
To adjust the pickup height, use a screwdriver to raise or lower the pickup screws located on either side of each pickup. A good starting point is to set the pickups closer to the strings for a stronger output, but not so close that they interfere with string vibration. Use your ear to fine-tune the height for the desired tone.
Regularly clean the guitar, change strings, and check for neck alignment and action adjustments. Keep the guitar in a stable environment, avoiding extremes in temperature and humidity. Periodically check and tighten any loose hardware and consider a professional setup at least once a year.
Store your Peavey Predator Plus in a hard case or padded gig bag when not in use. Keep it in a room with consistent temperature and humidity levels, avoiding direct sunlight, heat sources, and overly damp areas. Ensure the guitar is standing upright or lying flat to avoid undue stress on the neck.
If the tuning pegs are slipping, first check that the strings are properly wound and not slipping on the posts. Tighten the screws on the tuning peg buttons. If the problem persists, the tuning machines may need to be replaced with higher-quality, more stable ones.
For a sticky tremolo system, check for dirt or debris around the bridge and clean it with a soft brush. Lubricate moving parts with a small amount of guitar-specific lubricant. Ensure the tremolo springs are properly tensioned and consider adjusting or replacing them if necessary.