Peavey Detonator AX Operating Guide
![Peavey Detonator AX Guitar manual cover](/images/eoyNmfCOuGsEGfJuTcIMDrrN/thumbs/thumb175x175.webp)
To change the strings, first loosen the tuning pegs and remove the old strings. Thread the new strings through the bridge and up to the tuning pegs. Tighten the tuning pegs while ensuring the strings are properly seated in the nut and bridge saddle. Finally, tune the guitar to your desired pitch.
Use a soft, lint-free cloth to wipe down the guitar after each use. For deeper cleaning, use a guitar-specific polish and follow the manufacturer's instructions. Avoid using regular household cleaners, as they may damage the finish.
To adjust the action, use an Allen wrench to raise or lower the bridge saddles. Adjust each saddle individually to achieve the desired string height across the fretboard. Ensure that the neck has proper relief before making adjustments.
First, check the connections to ensure they are secure. If the problem persists, test the pickups with a multimeter to check for continuity. If you find any issues, consider consulting a professional technician for further diagnosis and repair.
To intonate your guitar, use a tuner and adjust the position of each bridge saddle forward or backward until the 12th fret note matches the open string note. This process may need to be repeated for each string to ensure accurate intonation.
Common issues include crackling pots and switches. Cleaning the pots and switches with contact cleaner can often resolve these problems. If the issue continues, consider replacing the faulty component.
Store your guitar in a hard case in a cool, dry place. Avoid areas with extreme temperature fluctuations or high humidity, as these can damage the wood and electronics. Regularly check the guitar for any signs of moisture or warping.
To replace the tuning pegs, remove the old pegs by unscrewing them from the headstock. Install the new pegs by aligning them with the holes and securing them with screws. Ensure the pegs are tight and aligned correctly.
Fret buzz can often be fixed by adjusting the truss rod to add or reduce neck relief. If the problem persists, inspect the frets for uneven wear and consider having them leveled by a professional.
Regularly clean the fretboard with a soft, damp cloth to remove dirt and oil. Occasionally, apply a small amount of lemon oil or fretboard conditioner to keep the wood nourished and prevent it from drying out.