Peavey 5150 212 Combo Operating Guide

Peavey 5150 212 Combo Amplifier manual cover

Pages 20

Year 1995

Language(s)

of 20

Peavey 5150 212 Combo Amplifier Specification

The Peavey 5150 212 Combo Amplifier is a high-powered, versatile guitar amp designed for professional musicians seeking robust performance and dynamic sound. This amplifier features a dual-channel operation with independent pre- and post-gain controls for each channel, allowing for seamless transitions between clean and overdriven tones. Each channel is equipped with a three-band EQ to fine-tune frequencies, providing precise tonal shaping capabilities. The 5150 Combo is driven by five 12AX7 preamp tubes and two 6L6GC power tubes, delivering a rich and responsive sound with considerable headroom and clarity.

The amplifier incorporates two custom-designed 12-inch Sheffield speakers, ensuring a full-bodied sound with ample projection. With an output power of 60 watts RMS, it provides substantial volume suitable for both live performances and studio recordings. It includes a global resonance control for adjusting low-frequency response, and a presence control to refine high-end frequencies. The built-in reverb adds depth to the sound, enhancing the overall sonic experience. For added flexibility, the 5150 Combo offers an effects loop for integrating external effects processors and a preamp output for direct connection to recording equipment or PA systems.

In terms of construction, the Peavey 5150 212 Combo features a rugged plywood cabinet, ensuring durability and longevity. The front panel is user-friendly, with clearly labeled knobs and switches for intuitive operation. The amplifier also includes a footswitch jack for channel switching and reverb control, providing convenient hands-free operation during performances. Overall, the Peavey 5150 212 Combo Amplifier combines powerful sound, versatile features, and durable construction, making it an ideal choice for guitarists seeking a reliable and high-quality amplification solution.

Peavey 5150 212 Combo Amplifier F.A.Q.

How do I properly set up my Peavey 5150 212 Combo Amplifier for the best sound quality?

To set up your Peavey 5150 212 Combo Amplifier, start by connecting your guitar to the input jack using a high-quality cable. Adjust the pre-gain and post-gain knobs to control the volume and gain levels according to your preference. Use the equalization knobs (low, mid, high) to tailor the tone to your liking. Finally, set the resonance and presence controls for additional tonal shaping and depth.

What should I do if the amplifier is not powering on?

If the amplifier is not powering on, first check that it is plugged into a working power outlet. Verify that the power switch is in the "on" position. Inspect the power cable for any visible damage. If everything seems in order, check the fuse located near the power cable socket and replace it if blown. If the issue persists, consult a professional technician.

How can I reduce unwanted noise and hum in my Peavey 5150 212?

To reduce noise and hum, ensure that all cables are of good quality and properly shielded. Keep the amplifier and cables away from electronic devices that may cause interference. Use a noise gate pedal to minimize unwanted sounds. Additionally, check the tube condition, as old or damaged tubes can introduce noise.

What maintenance does the Peavey 5150 212 Combo Amplifier require?

Regular maintenance includes checking and replacing tubes as needed, cleaning the exterior and control knobs, and ensuring the speaker connections are secure. It is also advisable to periodically check the amplifier for any loose screws or components.

How can I connect external speakers to the Peavey 5150 212 Combo Amplifier?

To connect external speakers, locate the speaker output jacks on the back of the amplifier. Use high-quality speaker cables to connect the amplifier to an external speaker cabinet. Ensure that the impedance levels are compatible between the amplifier and the speaker cabinet to avoid damage.

What should I do if the amplifier is producing distorted sound unexpectedly?

If distorted sound occurs unexpectedly, check the condition of the tubes, as they might be worn out or damaged. Ensure that all cables are properly connected and not damaged. Verify that the guitar's output and amplifier's input levels are set correctly. If the problem persists, have the amplifier checked by a technician.

Can I use the Peavey 5150 212 with an effects loop?

Yes, the Peavey 5150 212 Combo Amplifier includes an effects loop. Connect your effects pedals or processors by using cables to connect the "Send" jack to the input of your effects unit and the output of the effects unit back to the "Return" jack on the amplifier. Adjust the effects loop level for optimal integration with your signal chain.

What is the best way to store the amplifier when not in use?

Store the amplifier in a cool, dry place away from direct sunlight and moisture. Use a dust cover to protect it from dust accumulation. Ensure that it is unplugged and that cables are neatly coiled and stored separately to prevent damage.

How can I achieve a heavier distortion sound on the Peavey 5150 212?

To achieve a heavier distortion sound, increase the pre-gain control while keeping the post-gain at a manageable level. Use the high and mid EQ controls to boost the desired frequencies. Consider using a distortion or overdrive pedal in front of the amplifier for additional gain and tonal shaping.

How often should I replace the tubes in my Peavey 5150 212 Combo Amplifier?

Tubes should typically be replaced every 1-2 years, depending on usage. If you notice a drop in sound quality, increased noise, or microphonics, it may be time to inspect and replace the tubes. Regularly check for signs of wear and ensure that replacements are made with high-quality tubes.