PC Line PHBGOCB09 Installation Guide

To assemble the PC Line PHBGOCB09 Chair, follow the instructions provided in the manual. Start by attaching the base to the seat using the bolts provided. Then, attach the backrest to the seat. Ensure all screws are tightened securely.
The PC Line PHBGOCB09 Chair can support a maximum weight of 250 pounds (113 kg). Ensure not to exceed this limit to maintain safety and integrity of the chair.
To adjust the height of the chair, use the lever located under the seat on the right side. Pull the lever while seated to lower the chair, or pull it while standing to raise the chair.
If the chair is squeaking, check all bolts and screws to ensure they are tightened properly. Apply a lubricant such as WD-40 to the moving parts, especially where the backrest connects to the seat.
To clean the upholstery, use a soft cloth dampened with mild soap and water. Gently wipe the fabric and avoid using harsh chemicals or abrasive materials. Let it air dry completely before use.
The PC Line PHBGOCB09 Chair features adjustable armrests. To adjust them, press the button on the side of the armrest and move it to the desired height. Release the button to lock it in place.
If the chair tilts unexpectedly, check the tilt tension knob located under the seat to adjust the resistance. Tighten the knob to increase tension or loosen it to decrease tension. Ensure the tilt lock is engaged if you prefer a stable seat.
To replace the casters, turn the chair upside down and pull firmly on each caster to remove it. Insert the new casters by pushing them into the caster sockets until they click into place.
The chair is equipped with casters designed for both hard and carpeted floors. However, for optimal movement on carpets, consider using a chair mat.
It is recommended to check the screws and bolts every 6 months to ensure they remain tight. Regular maintenance will help prolong the lifespan of the chair and ensure safety.