Oki MC363dnw User's Guide
![Oki MC363dnw Printer manual cover](/images/AFaRMvOmaLjZFORYSPIZNGPH/thumbs/thumb175x175.webp)
To connect the Oki MC363dnw to a wireless network, press the 'Menu' button on the printer, navigate to 'Admin Setup', select 'Network', then 'Wireless', and follow the on-screen instructions to enter your Wi-Fi credentials.
If the printer is not printing, check if it's powered on, ensure it is connected to the network, and verify that there are no error messages on the display. Additionally, check the printer queue and restart the printer if necessary.
To replace the toner cartridge, open the top cover of the printer, remove the used cartridge by pulling it out, and insert the new cartridge securely in place. Ensure it clicks into position before closing the cover.
Regular maintenance tasks include cleaning the scanner glass, checking for paper debris inside the printer, and updating the printer firmware. Additionally, inspect the toner and drum units for wear and replace them as needed.
To resolve paper jams, carefully open the printer's access panels to locate and gently remove any jammed paper. Ensure there are no torn pieces left inside, and check the paper tray for incorrect paper sizes or overloading.
To update the firmware, download the latest firmware version from the Oki website, connect the printer to your computer via USB or network, and run the firmware update utility following the on-screen instructions.
Poor print quality can be due to low toner levels, dirty print heads, or incorrect print settings. Clean the printer, check toner levels, and adjust the print settings to ensure optimal quality.
To set up double-sided printing, access the printer properties from your computer's control panel, navigate to 'Printing Preferences', and select 'Duplex Printing' or 'Double-Sided' from the layout options.
Consult the printer's manual or the Oki support website for information on the specific error code. Follow the recommended troubleshooting steps, which may include turning the printer off and on, checking connections, or replacing parts.
To scan documents, place them on the scanner glass or in the ADF, press the 'Scan' button, select the destination (e.g., computer or USB), and follow the on-screen prompts to complete the scanning process.