Nissan Versa Sedan 2017 Quick Reference Guide
![Nissan Versa Sedan 2017 manual cover](/images/c2fc4d06c8c3f1a6b4a3739d/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system on your 2017 Nissan Versa Sedan, first ensure all tires are inflated to the correct pressure. Then, drive the vehicle at speeds above 16 mph (25 km/h) for a few minutes. The system will automatically update and the warning light should turn off.
The recommended oil type for the 2017 Nissan Versa Sedan is SAE 5W-30. The engine oil capacity with a filter change is approximately 3.7 quarts (3.5 liters).
To improve fuel efficiency, ensure your tires are properly inflated, perform regular maintenance such as oil changes and air filter replacements, avoid aggressive driving, and reduce excess weight in the vehicle.
To pair a phone with the Bluetooth system, first activate Bluetooth on your phone. Then, on the car's audio system, navigate to the Bluetooth settings and select 'Add Phone.' Follow the prompts on both the car system and your phone to complete the pairing process.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector, remove the old bulb by twisting it counterclockwise, insert the new bulb, and reconnect the electrical connector.
If the engine overheats, pull over safely, turn off the engine, and allow it to cool. Check the coolant level once the engine is cool. If low, add coolant and check for leaks. Seek professional assistance if the problem persists.
To change the cabin air filter, open the glove box and remove the dampener cord. Squeeze the sides of the glove box to lower it completely. Locate the cabin air filter cover, remove it, replace the old filter with a new one, and reassemble the glove box.
Common causes for a check engine light include a loose gas cap, faulty oxygen sensor, failing catalytic converter, or an issue with the mass airflow sensor. A diagnostic scan can help pinpoint the exact cause.
It is recommended to rotate the tires every 5,000 to 7,500 miles to ensure even wear and extend the life of the tires.
To jump-start the vehicle, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the charged battery. Connect the negative cable to the negative terminal of the charged battery, then to an unpainted metal surface on the engine block of the dead vehicle. Start the charged vehicle, then the dead vehicle.