Nissan Cube Quick Reference Guide
![Nissan Cube manual cover](/images/dc65ae6198da6de9f297727b/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system on a Nissan Cube, first ensure all tires are inflated to the recommended pressure. Drive the vehicle above 16 mph for about 10 minutes to allow the system to recalibrate. If the warning light stays on, consult your owner's manual or a professional technician.
The 2012 Nissan Cube typically requires SAE 5W-30 full synthetic oil. The oil capacity is approximately 4.1 quarts (3.9 liters) with a filter change. Always check the owner's manual for confirmation.
A rattling noise during startup could be due to a variety of issues such as a loose timing chain, worn timing chain tensioners, or low oil pressure. It is advisable to have a professional mechanic inspect the vehicle to diagnose the exact cause.
To improve fuel efficiency in your Nissan Cube, ensure regular maintenance such as oil changes, air filter replacements, and proper tire inflation. Additionally, avoid aggressive driving, reduce idling, and remove unnecessary weight from the vehicle.
Common issues with the Nissan Cube's CVT transmission include hesitation, shuddering, and overheating. Regular maintenance, such as fluid changes, can help mitigate these problems. If issues persist, seek advice from a certified transmission specialist.
To replace a headlight bulb on a Nissan Cube, open the hood and locate the headlight assembly. Remove the bulb cover, disconnect the power connector, and release the retaining clip. Replace the old bulb with a new one, ensuring not to touch the glass, and reassemble.
If your Nissan Cube's air conditioning is not blowing cold air, it could be due to low refrigerant levels, a malfunctioning compressor, or a blocked condenser. Inspect the system for leaks and consider a professional AC recharge or repair service.
A typical maintenance schedule for a Nissan Cube includes oil changes every 5,000 miles, tire rotations every 7,500 miles, brake inspections every 10,000 miles, and a coolant flush every 50,000 miles. Refer to your owner's manual for specifics related to your model year.
To connect your phone via Bluetooth to a Nissan Cube's audio system, enable Bluetooth on your device. Navigate to the setup menu on the car's audio system, select Bluetooth, and then pair a new device. Follow the prompts to complete the pairing process.
If the check engine light on your Nissan Cube comes on, first ensure the gas cap is tightly secured. If the light remains on, use an OBD-II scanner to check for diagnostic trouble codes. Consult a mechanic for further diagnosis and repair.