Nissan NV1500 2016 Quick Reference Guide
![Nissan NV1500 2016 manual cover](/images/71a9eb0c37e669728f4ad90d/thumbs/thumb175x175.webp)
To reset the maintenance light on your 2016 Nissan NV1500, turn the ignition to the "ON" position without starting the engine. Use the trip computer button to navigate to the "Settings" menu, then scroll to "Maintenance" and select "Reset" to clear the reminder.
The recommended oil for a 2016 Nissan NV1500 is 5W-30 synthetic oil. Always refer to the owner's manual for confirmation and additional specifications.
To improve fuel efficiency, ensure your tires are properly inflated, maintain regular engine tune-ups, use the recommended grade of motor oil, and remove unnecessary weight from the vehicle.
A squealing noise upon starting could indicate a worn serpentine belt or a faulty belt tensioner. Inspect the belt for wear and replace it if necessary, or consult a mechanic for further diagnosis.
The towing capacity of a 2016 Nissan NV1500 is up to 2,000 pounds. Always ensure you are not exceeding the vehicle's capacity and use the proper towing equipment.
To replace the cabin air filter, open the glove box and remove the retaining clips to access the filter housing. Slide out the old filter and replace it with a new one, ensuring the airflow direction is correct.
Poor acceleration can be caused by a clogged air filter, dirty fuel injectors, or a malfunctioning mass air flow sensor. Regular maintenance can help prevent these issues.
For the 2016 Nissan NV1500, park the vehicle on a level surface and ensure the engine is warm. With the engine idling, remove the transmission dipstick, wipe it clean, reinsert it, and then remove it again to check the fluid level. The fluid should be within the marked range.
If the check engine light comes on, check for any obvious issues such as a loose gas cap. If the light remains on, use an OBD-II scanner to retrieve diagnostic trouble codes or consult a mechanic for further inspection.
To jump start the NV1500, first ensure both vehicles are turned off. Connect the red jumper cable to the positive terminal of the dead battery, then to the positive terminal of the booster battery. Connect the black cable to the negative terminal of the booster battery, and attach the other end to an unpainted metal surface on the NV1500. Start the booster vehicle, then the NV1500. Remove the cables in reverse order.