Nissan Maxima 2018 Information Guide
![Nissan Maxima 2018 manual cover](/images/892ee275738631ccf17f2f09/thumbs/thumb175x175.webp)
To reset the maintenance light on a 2018 Nissan Maxima, turn the ignition switch to the ON position without starting the engine. Navigate to the maintenance menu on the display screen using the buttons on the steering wheel, select the maintenance item you want to reset, and follow the prompts to reset it.
Nissan recommends using SAE 0W-20 full synthetic motor oil for the 2018 Maxima to ensure optimal performance and fuel efficiency.
To connect your smartphone via Bluetooth, enable Bluetooth on your phone and go to the audio or phone settings on the Maxima's infotainment screen. Select 'Add New Device' and choose your phone from the list of available devices. Confirm any prompts on both the car's screen and your phone to complete the pairing.
If the air conditioning is not blowing cold air, check the refrigerant levels as they might be low. Also, inspect the A/C compressor and any related fuses. If issues persist, it may require professional diagnosis to check for leaks or more complex problems.
To replace the cabin air filter, open the glove compartment and remove the damper arm. Press in on the sides of the glove compartment to release it. The cabin air filter housing is located behind the glove box. Open the housing and replace the old filter with a new one, then reassemble in reverse order.
The recommended tire pressure for a 2018 Nissan Maxima is generally 33 PSI for both front and rear tires. Always check the owner's manual or the tire information label located on the driver's side door jamb for specific guidance.
To update the navigation system, you can visit the official Nissan Navigation website to purchase updated map data. Follow the instructions provided with the update to install it via USB or SD card as applicable.
The check engine light can be triggered by a variety of issues, including a loose gas cap, faulty oxygen sensor, or issues with the catalytic converter. It’s recommended to use an OBD-II scanner to read the error codes or visit a mechanic for a diagnosis.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the dust cover, disconnect the electrical connector, and release the retaining clip. Remove the old bulb and replace it with a new one. Reattach the connector and dust cover.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements, maintain proper tire pressure, remove unnecessary weight from the vehicle, and drive smoothly by avoiding rapid acceleration and excessive idling.