Contents

Front cover
Introduction
Manual List (M800/M80/E80/C80 Series)
Manual List (M800V/M80V Series)
Precautions for Safety
Treatment of waste
Disposal
Trademarks
Contents
1 Outline
- 1.1 System Image
  - 1.1.1 RGU Connection
  - 1.1.2 NC Direct Connection
- 1.2 Characteristics
- 1.3 Operation Environment
2 Connection (RGU Connection)
- 2.1 System Basic Configuration Drawing
- 2.2 General Connection Diagram
  - 2.2.1 Connection Example: Remote Service Gateway Unit and 800W/M80W Series
  - 2.2.2 Connection Example: Remote Service Gateway Unit and M800S/M80/E80 Series
  - 2.2.3 Connection Example: Remote Service Gateway Unit and M800VW/M80VW Series
  - 2.2.4 Connection Example: Remote Service Gateway Unit and M800VS/M80V Series
- 2.3 List of Configuration
  - 2.3.1 Module Configuration List
  - 2.3.2 Replacements
  - 2.3.3 Cables
- 2.4 General Specifications
  - 2.4.1 Environment Conditions (Installation Environment Conditions)
  - 2.4.2 24VDC Stabilized Power Supply Selecting Conditions
  - 2.4.3 Outline Dimension
  - 2.4.4 Installation Dimension
  - 2.4.5 Connectors
  - 2.4.6 Exclusive SD Cards for MITSUBISHI ELECTRIC CNC
    - 2.4.6.1 SD Interface
- 2.5 Installation
  - 2.5.1 Heat Radiation Countermeasures
  - 2.5.2 Noise Countermeasures
    - 2.5.2.1 Connection of Frame Ground (FG)
    - 2.5.2.2 Shield Clamping of Cables
    - 2.5.2.3 Connecting Spark Killers
    - 2.5.2.4 Lightning Surge Protection Countermeasure
  - 2.5.3 Unit Installation
- 2.6 Precautions for Connecting
  - 2.6.1 Precautions for Wiring
    - 2.6.1.1 Precautions when Connecting/Disconnecting Cables
    - 2.6.1.2 Precautions for Connecting 24V Power Supply
  - 2.6.2 Turning the Power ON/OFF
  - 2.6.3 Turning the Power ON/OFF of Remote Service Gateway Unit
- 2.7 Connecting Remote Service Gateway Unit
  - 2.7.1 General Connection System Drawing
  - 2.7.2 Connecting with Power Supply
  - 2.7.3 Connecting with Control Unit
  - 2.7.4 Connecting with Host Device (Cloud Server)
- 2.8 Cables
3 Initial Setup
- 3.1 Setup Procedures
  - 3.1.1 When Using RGU Connection
  - 3.1.2 When Using NC Direct Connection
- 3.2 When Using RGU Connection
  - 3.2.1 Connecting with Remote Service Gateway Unit (RGU)
    - 3.2.1.1 Network Connecting Method
    - 3.2.1.2 DIP Switch
    - 3.2.1.3 Rotary Switch
  - 3.2.2 Setting Parameters
    - 3.2.2.1 Setting the IP Address for the NC Control Unit
    - 3.2.2.2 Connecting with a PC for Setting
    - 3.2.2.3 Setting the IP Address for the RGU
    - 3.2.2.4 Parameters for Remote Service Connection of the RGU
    - 3.2.2.5 Setting Example
  - 3.2.3 Checking Cloud Connection Status
    - 3.2.3.1 Checking the Status by LEDs
    - 3.2.3.2 Checking on the Setting Screen
    - 3.2.3.3 Checking on the Remote Service Screen
- 3.3 When Using NC Direct Connection
  - 3.3.1 NC Connection
    - 3.3.1.1 Network Connecting Method
    - 3.3.1.2 General Connection System Drawing
    - 3.3.1.3 Connecting with Host Device (Cloud Server)
  - 3.3.2 Setting Parameters
    - 3.3.2.1 Setting the IP Address for the NC Control Unit
    - 3.3.2.2 Parameters for Remote Service Connection
    - 3.3.2.3 Setting Example
  - 3.3.3 Setting Parameters
    - 3.3.3.1 Checking on the Self Diagnosis Screen of the NC Control Unit
    - 3.3.3.2 Checking on the Remote Service Screen
    - 3.3.3.3 Precautions
- 3.4 Applicable Models
- 3.5 NC Versions on which Operation Has Been Confirmed
4 NC Remote Service
- 4.1 Remote Service Screen
- 4.2 Basic Operations
  - 4.2.1 Starting Up a Browser
  - 4.2.2 Display Language Setting
  - 4.2.3 Logging in to Remote Service
  - 4.2.4 Device Selection
  - 4.2.5 Changing Password
  - 4.2.6 Changing Screens
  - 4.2.7 Scheduled Operation Time Setting
  - 4.2.8 Logging Out of Remote Service
- 4.3 Details of Each Function
  - 4.3.1 Login Screen
  - 4.3.2 Device Screen
  - 4.3.3 Operation Screen
  - 4.3.4 Use Screen
  - 4.3.5 Alarm Screen
  - 4.3.6 Diagnosis Screen
    - 4.3.6.1 S/W Configuration
    - 4.3.6.2 H/W Configuration
    - 4.3.6.3 I/F Diagnosis
    - 4.3.6.4 Parameter Reference
    - 4.3.6.5 Drive Monitor
    - 4.3.6.6 Self Diagnosis
    - 4.3.6.7 Key Operation History
    - 4.3.6.8 Sampling Chart
  - 4.3.7 Utilities Screen
    - 4.3.7.1 Operation Status Acquisition
      - 4.3.7.1.1 Daily Operation Detail
      - 4.3.7.1.2 Monthly Operation Total
      - 4.3.7.1.3 Machining Result List
    - 4.3.7.2 History Data Acquisition
      - 4.3.7.2.1 Alarm History List
      - 4.3.7.2.2 Key History List
    - 4.3.7.3 NC File Data
      - 4.3.7.3.1 Online Storage Screen
      - 4.3.7.3.2 Auto Backup Setup
      - 4.3.7.3.3 Edit Auto Backup Setup Screen
      - 4.3.7.3.4 Automatic Backup Setup Method
    - 4.3.7.4 Alarm Diagnosis
      - 4.3.7.4.1 Diagnosis Data Settings
      - 4.3.7.4.2 Diagnosis Data Setting Screen
    - 4.3.7.5 Email Notification Settings
      - 4.3.7.5.1 Edit Email Notification Condition Screen
      - 4.3.7.5.2 Notification Condition Setting Method
  - 4.3.8 Password Change Screen
  - 4.3.9 Machine Information Edit Screen
    - 4.3.9.1 How to Edit the Machine Information
  - 4.3.10 Information Display
- 4.4 Restrictions
- 4.5 Message Outputs
  - 4.5.1 Output of Messages at the Top of the Browser
  - 4.5.2 Message Outputs on the "Utilities" Screen
  - 4.5.3 Message Outputs on the Machine Information Edit Screen
  - 4.5.4 Message Outputs on the Scheduled Operation Time Setting Dialog
  - 4.5.5 Message Outputs on the Alarm screen
- 4.6 Troubleshooting and FAQ
5 Appendix 1: EMC Installation Guidelines
- 5.1 Introduction
- 5.2 EMC Directives
- 5.3 EMC Measures
- 5.4 Panel Structure
  - 5.4.1 Measures for Control Panel Body
  - 5.4.2 Measures for Door
  - 5.4.3 Measures for Power Supply
- 5.5 Measures for Wiring in Panel
  - 5.5.1 Precautions for Wiring in Panel
  - 5.5.2 Shield Treatment of Cables
- 5.6 EMC Countermeasure Parts
  - 5.6.1 Shield Clamp Fitting
  - 5.6.2 Ferrite Core
  - 5.6.3 Surge Absorber
  - 5.6.4 Selection of Stabilized Power Supply
6 Appendix 2: Precautions for Compliance to UL/c-UL Standards
7 Appendix 3: Parameter List
8 Appendix 4: Error List
Function Compatibility
Revision History
Global Service Network
Back cover

Mitsubishi M80VW User's Manual

Mitsubishi M80VW Remote Service manual cover

Pages 232

Year 2022

Language(s)

of 232

Mitsubishi M80VW Remote Service Specification

The Mitsubishi M80VW Remote Service is an advanced remote monitoring and management solution designed to enhance the operational efficiency of Mitsubishi Electric CNC systems. This service provides real-time diagnostics and maintenance capabilities, enabling users to monitor CNC machine status, diagnose issues, and perform maintenance activities remotely. The M80VW integrates seamlessly with existing Mitsubishi Electric CNC systems and supports a secure, cloud-based infrastructure, ensuring reliable data transmission and storage.

The system is equipped with intuitive interfaces that facilitate easy navigation and access to critical machine data. It supports a wide range of data analytics tools, allowing users to analyze performance metrics and optimize machine operations. The M80VW's remote service capabilities include predictive maintenance features that leverage machine learning algorithms to forecast potential system failures and schedule timely maintenance, minimizing downtime.

Security is a priority in the M80VW Remote Service, incorporating advanced encryption protocols to protect sensitive data and ensure secure communication between machines and remote operators. Additionally, the service includes user authentication mechanisms to control access and maintain data integrity. The M80VW is designed to be highly scalable, accommodating the needs of small-scale operations as well as large manufacturing environments.

The system's compatibility with various network configurations and its support for multiple devices such as PCs, tablets, and smartphones make it versatile and accessible. This flexibility allows operators to manage and monitor their CNC systems from virtually any location. Overall, the Mitsubishi M80VW Remote Service represents a significant advancement in CNC machine management, offering enhanced productivity, reduced maintenance costs, and improved operational insights.

Mitsubishi M80VW Remote Service F.A.Q.

How do I connect to the Mitsubishi M80VW Remote Service?

To connect to the Mitsubishi M80VW Remote Service, ensure that your machine is connected to the internet. Access the remote service application on the control panel and enter your login credentials. Follow the on-screen instructions to establish a secure connection.

What should I do if the remote connection fails?

If the remote connection fails, check your internet connection and network settings. Ensure that firewall settings allow the service to connect. Restart the machine and try connecting again. If the issue persists, contact Mitsubishi support for assistance.

Can I monitor machine performance using the remote service?

Yes, the Mitsubishi M80VW Remote Service allows you to monitor machine performance metrics such as spindle speed, feed rate, and operational status in real-time, enabling efficient troubleshooting and maintenance planning.

How often should I perform maintenance checks on the M80VW system?

Regular maintenance checks should be performed according to the manufacturer's recommended schedule, typically every 6 months. However, frequency may vary based on usage intensity. Always refer to the user manual for specific guidelines.

What are common troubleshooting steps for software errors?

For software errors, restart the control unit and check for software updates. Ensure all cables are securely connected. If errors persist, consult the error code documentation or contact technical support for further assistance.

Is it possible to receive alerts for maintenance needs through the remote service?

Yes, the remote service can be configured to send alerts and notifications for scheduled maintenance and potential issues detected through machine diagnostics, helping to prevent downtime.

Can the M80VW Remote Service assist with software updates?

The M80VW Remote Service can facilitate software updates by allowing remote access for technicians to download and install the latest updates directly to your machine, ensuring it runs with the latest features and improvements.

What is the procedure for resetting the M80VW system to factory settings?

To reset the M80VW system to factory settings, access the system settings menu and select 'Factory Reset'. Follow the prompts, and ensure you backup important data before proceeding, as this will erase all custom settings and data.

How do I set up user access permissions for the remote service?

User access permissions can be configured through the administrative settings on the M80VW interface. Create user accounts with specific roles and permissions to control access to various features of the remote service.

What type of data can be logged and accessed through the remote service?

The remote service can log and provide access to operational data such as usage history, error logs, maintenance records, and performance metrics, allowing for comprehensive analysis and reporting.