Contents

FX2N-64DP-M Profibus-DP Master Block
Guidelines for the Safety
Table of Contents
1. Introduction
- 1.1 Features of the 64DP-M
- 1.2 External Dimensions and Each Part Name
  - 1.2.1 Pin Configuration of Profibus-DP Communication Port
- 1.3 System Configuration
  - 1.3.1 Applicable Profibus-DP Network
  - 1.3.2 Applicable Programmable Controller
2. Wiring and Mounting
- 2.1 Mounting
  - 2.1.1 Arrangements
  - 2.1.2 Mounting
- 2.2 Wiring
  - 2.2.1 Wiring of Power Supply
  - 2.2.2 Wiring of Profibus-DP
  - 2.2.3 Terminating Resistor
3. Specifications
- 3.1 General Specifications
- 3.2 Power Supply Specifications
- 3.3 Performance Specifications
4. Mode and Displayed Station Address
- 4.1 Mode
  - 4.1.1 Mode Setting Switch
- 4.2 Displayed Station Address
5. Diagnostics
- 5.1 Preliminary Checks
- 5.2 Check the Status of the LEDs for the 64DP-M
- 5.3 Self Diagnostic of the 64DP-M
Appendix A: Further Information Manual List
Back Cover

Mitsubishi Electric FX2N 64DP M Hardware Manual

Mitsubishi Electric FX2N 64DP M manual cover

Pages 52

Year 2001

Language(s)

of 52

Hardware Manual

52 pages

User's Manual

118 pages

Mitsubishi Electric FX2N 64DP M Specification

The Mitsubishi Electric FX2N-64DP-M is a compact and versatile programmable logic controller (PLC) designed to enhance automation systems with its robust performance and flexibility. It features 64 I/O points, providing ample connectivity for various industrial applications. The module is engineered to support a wide range of input and output devices, enabling seamless integration into existing systems.

This PLC module operates within a voltage range of 20.4 to 28.8 VDC, ensuring stable performance in diverse environments. Its power consumption is optimized for efficiency, making it suitable for energy-conscious applications. The FX2N-64DP-M is equipped with advanced processing capabilities, allowing for rapid execution of control tasks, which is crucial in time-sensitive industrial operations.

Connectivity is a key feature of this PLC, as it supports communication with other devices through its built-in RS-485 interface. This facilitates data exchange and remote monitoring, enhancing the overall control and management capabilities of the system. The module also supports expansion, allowing users to add additional I/O modules to meet growing automation needs.

The device is designed with user-friendly programming in mind, compatible with Mitsubishi's GX Developer software, which provides an intuitive interface for configuring and managing the PLC's functions. This ease of programming ensures that even complex automation tasks can be implemented efficiently.

In terms of physical design, the FX2N-64DP-M is compact and rugged, suitable for installation in various industrial environments. Its durability is complemented by a robust build quality, ensuring reliable operation under challenging conditions. Overall, the Mitsubishi Electric FX2N-64DP-M stands out as a reliable, efficient, and flexible solution for modern industrial automation requirements.

Mitsubishi Electric FX2N 64DP M F.A.Q.

How do I configure the communication settings for the FX2N-64DP-M module?

To configure the communication settings for the FX2N-64DP-M, use the GX Developer software. Connect your PC to the PLC, navigate to the parameter settings, and select the appropriate communication settings such as baud rate, parity, and stop bits as required by your network.

What is the process for updating the firmware on the FX2N-64DP-M module?

To update the firmware, first ensure that your module supports firmware updates. Connect the module to a PC using the appropriate cable, launch the Mitsubishi firmware update tool, and follow the on-screen instructions. Make sure to back up your data before proceeding with the update.

How can I troubleshoot communication issues with the FX2N-64DP-M module?

Start by checking the cable connections and ensuring that they are secure. Verify that the communication settings in the software match the hardware settings. Check for any error codes on the module's LEDs, and consult the user manual for specific troubleshooting steps based on those codes.

What maintenance is required for the FX2N-64DP-M module to ensure optimal performance?

Regularly inspect the module for dust and debris, and clean it with a soft, dry cloth. Ensure that the ventilation openings are not blocked. Periodically check the connections and tighten if necessary. It's also advisable to perform regular software updates as released by Mitsubishi Electric.

Can the FX2N-64DP-M module be used in a network with other Mitsubishi PLCs, and if so, how?

Yes, the FX2N-64DP-M module can be integrated into a network with other Mitsubishi PLCs using PROFIBUS-DP as a communication protocol. Ensure that each device on the network has a unique address and that the network topology is correctly set up.

What steps should be taken if the FX2N-64DP-M module is not powering on?

Check the power supply connections to ensure they are secure and that the power source is functioning correctly. Verify the module's voltage requirements and inspect for any blown fuses or tripped circuit breakers. If the problem persists, consult the technical support team.

How do I reset the FX2N-64DP-M module to its factory settings?

To reset the module to factory settings, turn off the power, locate the reset switch on the module, and press it while turning the power back on. Hold the switch for a few seconds until the status LEDs indicate a reset. Refer to the manual for detailed instructions.

What are the common error codes on the FX2N-64DP-M, and how can they be resolved?

Common error codes include E0 (hardware fault) and E1 (communication error). For E0, check the module for physical damage and ensure all connections are secure. For E1, verify network settings and cable integrity. Consult the manual for a comprehensive list of error codes and solutions.

Is it possible to extend the functionality of the FX2N-64DP-M module, and how?

Yes, the functionality of the FX2N-64DP-M can be extended by adding compatible expansion modules. Ensure that additional modules are supported by your existing PLC setup and update the configuration in your programming software accordingly.

What safety precautions should be observed when handling the FX2N-64DP-M module?

Always power down the module before performing any maintenance or modifications. Use appropriate personal protective equipment (PPE) and adhere to the relevant electrical safety standards. Ensure that the working environment is dry and free from conductive materials.