Mini Hardtop 4 Door 2016 Owner's Manual

To reset the tire pressure monitoring system, start the engine and press the menu button on the turn signal lever. Scroll to the "Vehicle Info" menu, select "Vehicle Status," then select "Perform Reset." Follow the on-screen instructions.
It's recommended to use a fully synthetic 5W-30 oil that meets BMW Longlife-01 specifications for your 2016 Mini Hardtop 4 Door.
To pair your smartphone, enable Bluetooth on your phone and navigate to the Mini Connected menu on the car's display. Select "Connect New Device" and follow the prompts to complete the pairing process.
The recommended maintenance schedule includes oil changes every 10,000 miles or 12 months, brake fluid replacement every 24 months, and regular inspections of the brakes, tires, and coolant levels.
To replace the cabin air filter, open the glove compartment and remove the cover panel behind it. Slide out the old filter and insert the new one, ensuring the airflow arrows are pointing in the correct direction. Reattach the cover panel.
The check engine light can be triggered by various issues, such as a loose fuel cap, oxygen sensor failure, or spark plug problems. It's best to diagnose the issue using an OBD-II scanner or consult a professional mechanic.
To change a flat tire, locate the jack and spare tire under the boot floor. Use the lug wrench to loosen the lug nuts slightly, then jack up the car and remove the lug nuts completely. Replace the flat tire with the spare and tighten the lug nuts in a star pattern. Lower the car and fully tighten the lug nuts.
If the battery dies, you can jump-start the car using jumper cables and another vehicle, or use a portable jump starter. Connect the cables to the correct terminals, start the assisting vehicle, and then start your Mini. Once running, disconnect the cables in the reverse order.
To adjust the headlight aim, locate the adjustment screws on the headlight assembly. Park the car on a level surface facing a wall and use the screws to adjust the vertical and horizontal aim until the beams are properly aligned.
To replace the windshield wipers, lift the wiper arm away from the windshield and press the release tab on the wiper blade. Slide the old blade off and attach the new blade by sliding it onto the wiper arm until it clicks into place.