Mini Hardtop 2 Door 4 Door Connected 2021 Owner's Manual
![Mini Hardtop 2 Door 4 Door Connected 2021 manual cover](/images/6d930330ad65c9ef1e7074f6/thumbs/thumb175x175.webp)
To pair your smartphone, enable Bluetooth on your phone and select 'Mini Connected' from the available devices. Enter the pairing code displayed on your Mini's screen to complete the process.
Try restarting the system by turning the ignition off and on. If the problem persists, check for software updates or perform a factory reset through the settings menu.
You can update the navigation maps by downloading the latest version from the Mini website onto a USB drive and inserting it into your car's USB port. Follow the on-screen instructions to complete the update.
The recommended tire pressure is typically found on a sticker inside the driver's door or in the owner's manual. It's important to check this regularly and maintain the correct pressure for optimal performance and safety.
To check the oil, ensure the engine is cool, then open the hood and locate the dipstick. Pull it out, wipe it clean, reinsert it fully, and then remove it again to check the oil level. Top up if necessary.
To reset the service indicator, turn the ignition to the on position without starting the engine. Press and hold the trip reset button until the service indicator starts flashing, then release and press it again to reset.
A ticking noise could be due to low oil levels, using the wrong type of oil, or a problem with the engine's valvetrain. Check the oil level and condition first, and consult a professional if the noise persists.
Regular maintenance includes checking the brake pads and rotors for wear, ensuring the brake fluid is at the correct level, and replacing components as necessary to maintain optimal braking performance.
Improve fuel efficiency by maintaining regular service intervals, ensuring tires are properly inflated, driving smoothly without sudden acceleration, and minimizing idling.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the cover, disconnect the wiring harness, and replace the old bulb with a new one, ensuring it is securely in place.