Mini Convertible 2021 Owner's Manual
![Mini Convertible 2021 manual cover](/images/2d6c1e2573a4e8907c227619/thumbs/thumb175x175.webp)
To connect your phone to the Mini Convertible 2021's Bluetooth system, go to the 'Settings' menu on your infotainment system, select 'Connections', then 'Bluetooth', and follow the on-screen instructions to pair your device.
The recommended tire pressure for the Mini Convertible 2021 is typically 32 PSI for the front tires and 30 PSI for the rear tires. However, always check the vehicle's manual or the sticker located on the driver's side door jamb for the most accurate information.
To reset the oil change light, turn on the ignition without starting the engine, press and hold the 'BC' button on the turn signal stalk until the service menu appears, then scroll to 'Oil Change' and hold the button again to reset.
The Mini Convertible 2021 typically requires a synthetic 5W-30 engine oil. It's important to use oil that meets MINI's specifications, which can be found in your owner's manual.
If the convertible top won't open or close, check the fuse associated with the convertible system, ensure the vehicle is in 'Park' or 'Neutral', and the handbrake is applied. If problems persist, consult with a professional technician.
Common maintenance intervals include oil changes every 10,000 miles, brake fluid replacement every 24 months, and air filter replacement every 30,000 miles. Always refer to the owner's manual for specific intervals.
To replace a headlight bulb, open the hood, locate the back of the headlight assembly, remove the cover, disconnect the wiring harness, remove the old bulb, and insert the new bulb. Reconnect everything in reverse order.
If experiencing poor fuel economy, check tire pressure, ensure regular maintenance is up to date, and avoid excessive idling. Additionally, driving habits such as rapid acceleration and heavy braking can affect fuel efficiency.
To update the navigation system, obtain the latest map updates from MINI's official website or dealership. Insert the USB drive with the update into the car's USB port and follow the on-screen instructions.
To perform a system check, use the onboard computer by pressing the 'BC' button on the turn signal stalk. This will cycle through various system statuses such as oil level, brake fluid, and other key indicators.