Midland Regatta 1 Owner's Manual
![Midland Regatta 1 manual cover](/images/LbPvtSkSYfrYvkYPKjjRjstW/thumbs/thumb175x175.webp)
To program channels, turn on the radio, press the 'Menu' button, use the up/down arrows to select 'Channel', and use the same arrows to select your desired channel. Press 'Menu' again to save.
To maintain battery life, fully charge the battery before first use, avoid overcharging, and store the radio in a cool, dry place. Turn off the radio when not in use to conserve battery.
To perform a factory reset, turn off the radio, press and hold the 'Menu' and 'Power' buttons simultaneously until the display shows ‘Reset’. Release the buttons to complete the reset.
Ensure the battery is fully charged and properly installed. Check the power button for any damage. If the radio still does not turn on, consider replacing the battery or contacting customer support.
To improve signal reception, extend the antenna fully and position the radio in an open area away from obstructions. Avoid using the radio in areas with high interference.
Yes, the Midland Regatta 1 Radio is waterproof. However, ensure all covers are properly sealed to prevent water ingress. Dry the radio thoroughly after exposure to water.
Press the 'Menu' button, navigate to the 'Weather' option using the up/down arrows, and press 'Select'. The radio will alert you to any severe weather updates.
The 'SCAN' feature allows the radio to automatically cycle through available channels, stopping when it detects a signal. Press 'Scan' to activate this feature.
To lock the keys, press and hold the 'Lock' button until the lock icon appears on the display. Repeat the process to unlock the keys.
Check the volume settings and ensure the speaker is not obstructed. If using an external speaker or headset, check the connections. Adjust the squelch settings to improve audio clarity.