Midland Nautico 1 Owner's Manual
![Midland Nautico 1 manual cover](/images/wDKOlbuwKyhxbGnhckygaduq/thumbs/thumb175x175.webp)
To change the channel on the Midland Nautico 1 Radio, use the 'CH' button on the front panel. Press the button until you reach the desired channel number displayed on the screen.
If the radio is not turning on, first ensure that the batteries are correctly installed and have sufficient charge. If using a rechargeable battery pack, make sure it is properly seated and fully charged.
To improve reception, try extending the antenna fully and adjusting its position. Also, ensure you are in an open area away from obstructions that may block the signal.
The Midland Nautico 1 Radio is water-resistant and can be used in light rain or wet conditions, but it should not be submerged in water. Always dry it off after exposure to moisture.
To perform a factory reset, turn off the radio and then turn it back on while holding down the 'MON' button. This will reset all settings to their default values.
The Midland Nautico 1 Radio uses four AA alkaline batteries or an optional rechargeable battery pack.
Static noise can be due to weak signal reception or interference from electronic devices. Try moving to a different location or away from sources of interference.
To lock the keypad, press and hold the 'LOCK' button until the lock icon appears on the display. To unlock, repeat the process.
The range of the Midland Nautico 1 Radio can vary depending on environmental conditions but typically extends up to 10 miles in optimal conditions.
Adjust the volume by turning the 'VOL' knob located on the top of the radio. Turn it clockwise to increase the volume and counterclockwise to decrease it.