Midland LXT376 X-tra Talk Owner's Manual
![Midland LXT376 X-tra Talk manual cover](/images/WUYXmEctNHJJzyQNAiNpaKso/thumbs/thumb175x175.webp)
To charge the Midland LXT376 X-tra Talk Radio, connect the AC/DC adapter to the radio's charging port and plug it into a standard electrical outlet. Allow the radio to charge for several hours until the battery indicator shows a full charge.
The Midland LXT376 X-tra Talk Radio has a range of up to 26 miles in open areas. However, obstructions such as buildings and trees can reduce the effective range.
To troubleshoot poor reception, ensure the antennas are fully extended, check that the radios are set to the same channel and privacy code, and verify that the batteries are fully charged. Additionally, try moving to a higher elevation or open area.
Adjust the volume on the Midland LXT376 by turning the volume knob located on the top or side of the radio. Rotate the knob clockwise to increase the volume and counterclockwise to decrease it.
If your Midland LXT376 won't turn on, check if the batteries are properly installed and fully charged. If the issue persists, try replacing the batteries with new ones. If the radio still doesn't turn on, it may require service.
To use the call alert feature, press the CALL button on the radio. This will send an alert tone to other radios on the same channel and privacy code.
Yes, the Midland LXT376 is compatible with most two-pin Midland headsets. Simply connect the headset to the radio's accessory jack.
To scan for active channels, press the SCAN button on the radio. The radio will automatically cycle through available channels and stop when it detects activity.
The Midland LXT376 X-tra Talk Radio offers up to 12 hours of battery life on a full charge, depending on usage and environmental conditions.
To perform a factory reset, turn off the radio, then hold down the PTT (Push-To-Talk) button and the power button simultaneously until the radio beeps. This will reset the radio to its default settings.