Midland LXT340 X-tra Talk Owner's Manual
![Midland LXT340 X-tra Talk manual cover](/images/FlOtziKZYDWKVTaEzveJpcmj/thumbs/thumb175x175.webp)
To change the channel, press the 'Menu' button until the channel number starts flashing. Use the 'Up' or 'Down' buttons to select the desired channel, and press 'PTT' to confirm.
First, ensure the batteries are correctly installed and not depleted. If using rechargeable batteries, make sure they are fully charged. If the problem persists, try replacing the batteries with new ones.
To improve the range, ensure there are no obstructions between the radios, and use them in open areas. Elevating the radio or using it outdoors can also help enhance the range.
The 'Monitor' button is used to check for weak signals on the current channel. Pressing it will temporarily disable the squelch, allowing you to hear all transmissions on that channel.
To activate VOX, press the 'Menu' button until 'VOX' appears on the display. Use the 'Up' or 'Down' buttons to set the desired sensitivity level, then press 'PTT' to confirm the setting.
Static noise can be due to weak signals or interference. Try adjusting the squelch setting by pressing the 'Menu' button until the squelch menu appears, and then using the 'Up' or 'Down' buttons to adjust it.
The Midland LXT340 is water-resistant, which means it can withstand light rain or splashes. However, it is not waterproof, so it should not be submerged or exposed to heavy rain for extended periods.
To reset the radio, turn it off and then press and hold the 'PTT' and 'Monitor' buttons simultaneously while turning it back on. This will reset all settings to factory defaults.
The battery life of the Midland LXT340 can last up to 24 hours when using high-quality alkaline batteries, depending on the usage and transmission power settings.
To lock the keypad, press and hold the 'Lock' button until the lock icon appears on the display. This will prevent accidental changes to the settings.