Midland GXT500 X-tra Talk Owner's Manual
![Midland GXT500 X-tra Talk manual cover](/images/oCFSYGVzxmtmEwvblHqDUnRL/thumbs/thumb175x175.webp)
To change the channel, press the 'MENU' button until the channel number starts to flash. Use the 'UP' or 'DOWN' buttons to select your desired channel, then press 'PTT' to confirm.
Press the 'MENU' button until the weather channel number appears. Use the 'UP' or 'DOWN' buttons to select the desired weather channel. Press 'MENU' again to save the setting.
Check if the batteries are correctly installed and charged. If using a rechargeable battery pack, ensure it is properly seated and charged. Replace with new batteries if necessary.
Press and hold the 'MENU' button for 3 seconds until the lock icon appears on the display. To unlock, hold the 'MENU' button again for 3 seconds.
Yes, the Midland GXT500 is equipped with a headphone jack. Simply plug in the headphones to use them.
To reset to factory settings, turn off the radio, then turn it back on while holding the 'MENU' and 'MONITOR' buttons. This will reset all settings to default.
The Midland GXT500 radios have a range of up to 36 miles under optimal conditions. However, actual range may vary based on terrain, weather, and obstructions.
To improve battery life, use the 'Power Save' feature, avoid high volume levels, and turn off the radio when not in use. Regularly charge the batteries and replace them as needed.
Press the 'MENU' button until the privacy code indicator flashes. Use 'UP' or 'DOWN' to select the desired privacy code and press 'PTT' to confirm the setting.
Ensure the volume is set to an appropriate level and check if the speaker or microphone is obstructed. If using a headset, ensure it is properly connected.