Midland GXT2050 Owner's Manual
![Midland GXT2050 manual cover](/images/XfEMNjwDFwkfYTfaXIhVtAUf/thumbs/thumb175x175.webp)
To pair the Midland GXT2050 with another radio, set both radios to the same channel and privacy code. Ensure the radios are within range and on the same frequency band.
To maximize battery life, fully charge the radio before use, avoid constant transmission, and use the radio in low power mode when possible.
Check if the antenna is properly attached, ensure the radio is on the correct channel, and verify that there are no obstructions blocking the signal.
Ensure that the batteries are properly installed and charged. If the issue persists, try replacing the batteries or checking the battery contacts for corrosion.
To perform a factory reset, turn off the radio, hold down the 'Menu' button, and turn the radio back on while still holding the button until the reset is complete.
Yes, the Midland GXT2050 is compatible with most Midland headsets. Simply connect the headset to the accessory jack on the radio.
Press the 'Menu' button until the privacy code option appears, use the 'Up' or 'Down' buttons to select the desired code, and press 'PTT' to confirm.
The Midland GXT2050 can reach up to 36 miles in open areas with little obstruction. In urban environments, the range can be significantly reduced to 1-3 miles.
When NOAA weather alerts are active, the radio will display a weather icon on the screen and sound an alert tone when a broadcast is received.
Regularly clean the radio with a soft, dry cloth, ensure the antenna and battery contacts are clean, and store the radio in a dry, cool place when not in use.