Midland ER50 Owner's Manual

To charge the Midland ER50 Radio, connect the included USB cable to the micro USB port on the radio and plug it into a power source such as a computer or USB wall adapter. The charging indicator will light up to show it's charging.
If the radio does not turn on, ensure that the battery is properly inserted and charged. If it still does not work, try doing a reset by removing and reinserting the battery.
To improve reception, fully extend the telescopic antenna and position the radio near a window or in an open area. Avoid obstacles like thick walls or metal objects that might block the signal.
To maintain the radio, keep it dry and clean. Avoid exposing it to extreme temperatures. Regularly check the battery contacts and clean them if necessary to ensure good conductivity.
To set the time, press and hold the 'Time' button until the hour starts flashing. Use the tuning knob to adjust the hour, then press 'Time' again to set minutes. Press 'Time' once more to confirm.
Ensure that the alert function is enabled by checking the settings. Also, make sure the radio is tuned to the correct weather channel and that you are within the broadcast range of an alert station.
To switch between AM and FM modes, press the 'Band' button until the desired band is displayed on the screen. Adjust the tuning dial to select your station.
Yes, the Midland ER50 Radio can operate on its rechargeable battery during a power outage. Ensure the battery is charged beforehand, or use the hand crank to generate power if needed.
The battery indicator on the display screen shows the battery level. When the indicator shows low power, it's time to recharge the battery.
Yes, the Midland ER50 Radio has a headphone jack. Simply plug your headphones into the jack for personal listening.